Backing plate

Old 05-12-2018, 06:26 AM
Junior Member
Thread Starter
Join Date: Jun 2013
Posts: 8
Default Backing plate

can you change out the backing plates to accomidate smaller areas?
aquajon1 is offline  
Old 05-14-2018, 07:06 AM
Senior Member
Join Date: Apr 2015
Location: Stuart, Florida
Posts: 556

The short answer is yes. Each of our three machines can accept various pads from other manufactures, but you'll have to make sure that the aftermarket pad matches up. The rotary polisher has an industry standard 5/8ths male post that accepts almost all attachments designed for those style machines.

The Dual Action Polisher Pro will accept any pad that secures over the locking nut in the free floating bearing of the polishers head. It would be secured using an Alan bolt and holding the pad still on the locking nut. If you've got a specific pad in mind, send me the link and I'll let you know if it will fit.

The original Dual Action Polisher will accept any 5/16ths 24 male threaded attachment. You need the skinny wrench that comes with the polisher to change attachments on that machine. Again, let me know if you have questions.
CaptSamShurhold is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread