Go Back  The Hull Truth - Boating and Fishing Forum > PRODUCTS > Shurhold Industries
Reload this Page >

Cleaning Non-Skid before Pro-Polish?

Notices

Cleaning Non-Skid before Pro-Polish?

Old 09-09-2019, 10:09 AM
  #1  
Member
Thread Starter
 
Join Date: Mar 2018
Location: Lake Erie
Posts: 92
Default Cleaning Non-Skid before Pro-Polish?

I've bought the DA Polisher, soft and medium brushes, and Pro-Polish. Put a coat on this past spring. Works as advertised...

What should I use to cut the non-skid a bit to get all the old wax out, oxidation, and dirt under the wax? I have a few spots where the Pro-polish did not dig out the stains/dirt.

Thanks...
peninsula_jumper is offline  
Old 09-09-2019, 01:53 PM
  #2  
Senior Member
 
Join Date: Apr 2015
Location: Stuart, Florida
Posts: 559
Default

Originally Posted by peninsula_jumper View Post
I've bought the DA Polisher, soft and medium brushes, and Pro-Polish. Put a coat on this past spring. Works as advertised...

What should I use to cut the non-skid a bit to get all the old wax out, oxidation, and dirt under the wax? I have a few spots where the Pro-polish did not dig out the stains/dirt.

Thanks...
Start with deep scrubbing with our SMC and a Medium or Stiff deck brush. SMC is our strongest cleaner and will strip the old wax and lift built up stains. If any spots remain after that step, you could compound them by hand with a little Buff Magic. Then, you'll wax again as you did last time. I hope that helps and good luck with the boat!
CaptSamShurhold is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread