Notices
 
Search: Posts Made By: Outboard Specialties
Showing results 1 to 25 of 500
Search took 0.42 seconds.
Replies: 9
Views: 260

That sounds like your problem. The dual station...

That sounds like your problem. The dual station adapter harness goes in the lower station so the harness from motor plugs into it, one plug goes to lower station bcm harness, and another main...
Replies: 9
Views: 260

Second station doesn’t matter unless you have a...

Second station doesn’t matter unless you have a gauge up there or a nmea device connected on network. It sounds like you have a connection problem,a bad tee, bad engine adapter cable or network is...
Replies: 9
Views: 260

The latest c10 software version is 1.1-50.2.126...

The latest c10 software version is 1.1-50.2.126 and the interface version is 3.54
05-21-2019, 05:00 AM
Replies: 12
Views: 710

You can get the approval ahead of time so you...

You can get the approval ahead of time so you know you can get financed, we then have 30 days to finalize the install and sign the final contract. The final contract cannot be done until there is a...
Replies: 2
Views: 150

Existing 26" centers is just fine.

Existing 26" centers is just fine.
Replies: 9
Views: 260

Go into the gauge menu- settings, system,...

Go into the gauge menu- settings, system, network, then auto-select. Highlight auto-select and hit enter, when prompted to proceed hit yes then wait a couple secs and go back out to gauge display...
Replies: 2
Views: 164

Suzuki only recommends regular lead acid...

Suzuki only recommends regular lead acid batteries as this is what they do all of there testing with. I do not have any experience with lithium batteries to say they are ok or not, but if there...
Replies: 4
Views: 265

Unfortunately you are having a bad experience,...

Unfortunately you are having a bad experience, You will love the suzuki though once you get it. Best of luck to you and reach out if you have any other questions.
Replies: 4
Views: 265

That is totally dealer discretion and up to them....

That is totally dealer discretion and up to them. If I can seatrial a boat safely and finish it up I will absolutely do what I can to get it delivered and back to the customer. Not all dealers are...
05-15-2019, 11:30 AM
Replies: 6
Views: 172

OK, that was easy enough. Glad it worked out.

OK, that was easy enough. Glad it worked out.
05-15-2019, 11:01 AM
Replies: 6
Views: 172

Where did the motors come from? I would call...

Where did the motors come from? I would call that dealer and sort it out, it is their responsibility. Already sounds like they messed up the nmea network, which if initialized properly they would...
05-15-2019, 10:59 AM
Replies: 6
Views: 172

Sounds like you have a rigging issue- missed...

Sounds like you have a rigging issue- missed connections, wrong connections, missing resistors, bad voltage, could be any number of things including not being initialized or not initialized properly.
05-15-2019, 10:56 AM
Replies: 5
Views: 265

The problem with white rigging hose is it will...

The problem with white rigging hose is it will fade, crack and turn yellow in the Florida sun in about 1-2 years. Plus it is not the same white as the Suzuki motor(if that is your brand of choice)...
05-15-2019, 10:48 AM
Replies: 6
Views: 172

Were these motors initialized by the dealer? If...

Were these motors initialized by the dealer? If not they will not function properly. Having no gauges should not cause an alarm but if you have a gauge working it will give you a fault code as to...
Replies: 1
Views: 150

That sounds like the culprit, the dirty filter...

That sounds like the culprit, the dirty filter will cause the surging like that. If the motor sat for awhile it would explain the crystals you mention.
Hopefully you are good to go.
05-13-2019, 04:33 AM
Replies: 6
Views: 435

More then likely you have a bad engine interface...

More then likely you have a bad engine interface or bad gauge, something shorted out to be able to throw all those random codes. If voltage and connections all seem good then this would be the case,...
Replies: 4
Views: 196

The water grip prop does use a different thrust...

The water grip prop does use a different thrust washer behind the prop and spline washer in front of the prop. You need to get the correct hardware for watergrip not necessarily 250ap. Use the most...
Replies: 4
Views: 437

Morning, Suzuki's official stance is do not use...

Morning, Suzuki's official stance is do not use agm's. With that being said many people including myself use agm's on suzuki's with no problems, I think it is more of a case where it needs to be...
Replies: 5
Views: 262

Either one of those could be a problem. Is this...

Either one of those could be a problem. Is this on a new motor? We sometimes see where paint build up will rub on the props on a brand new motor and cause slight rubbing.
05-01-2019, 10:48 AM
Replies: 3
Views: 193

8-3 is an electronic shift actuator(ESA) code. ...

8-3 is an electronic shift actuator(ESA) code. More then likely your mechanical shift linkage is binding up and sticking cause the ESA to work harder and not be able to shift properly. You will...
Replies: 3
Views: 258

I have not even tried the connect cable yet but...

I have not even tried the connect cable yet but its a possibility of it working on earlier models, just not sure yet.
Replies: 1
Views: 339

Thank you Russel, you and your family were a...

Thank you Russel, you and your family were a pleasure to deal with as well and I am glad you guys made it to Bimini for the experience.
Replies: 3
Views: 258

Hello, There is 2 new software versions for the...

Hello,
There is 2 new software versions for the engine interfaces, 354 and 294, these should correct all of the glitchy problems we have been seeing with engine data being lost. I have been running...
Replies: 2
Views: 244

I would check the mechanical linkage on the motor...

I would check the mechanical linkage on the motor where the electronic actuator hooks up. It may be tight and binding and not fully engaging forward from the get go so it pops out. Make sure...
04-23-2019, 08:05 AM
Replies: 35
Views: 3,436

Thank you Caribbeancowboy, it was a pleasure...

Thank you Caribbeancowboy, it was a pleasure working with you. The other OM at the shop is also going with the 300's now.
Showing results 1 to 25 of 500
 


 
Forum Jump