The Hull Truth - Boating and Fishing Forum

Go Back   >
Search


Reply
 
Thread Tools Search this Thread
Old 05-07-2014, 07:27 AM   #1
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default Over 1000 Props To Choose From, Always Updated!

I have over 1000 props to choose from. Most are stainless but there are a few aluminum in there. Yamaha, Mercury, OMC, Suzuki, Honda, Bravo 3, Volvo Penta. They are all inventoried below and numbered.

Shipping usually runs about $ 25 per prop. Will ship to the united states only.

Prices are FIRM. I accept paypal as payment or check. Cash in person also accepted.

Located in Gainesville, Florida for local pickup and travel the state of Florida often. Feel free to call or text 352-317-5105 anytime.

Props that fit smaller engines (20-60 or so, call to verify)

195) 10 1/2" X 11P, Michigan Wheel 390728 stainless, 14 spline that fits 20-35 hp Evinrude/Johnson, painted black, excellent condition, $ 100
375) 10 3/8" X 11P Powertech, pressed 13 spline Yamaha style hub, SCB3R11PYS50, looks almost new, $ 200
434) Aluminum 10" X 11P Michigan Wheel Vortex, small flo torq style hub not included, reconditioned, $ 40
435) Aluminum 10 1/2" X 9 Pitch I believe Michigan Wheel Vortex, excellent prop, $ 40
479) Aluminum 11.1" X 13P, pressed 13 spline Yamaha hub, off 50 hp Yamaha 2 stroke, shows wear, $ 20
537) Aluminum 11 3/4" X 10P, 10G Yamaha prop, pressed 13 spline Yamaha hub, nice used prop, $ 30
621) 12" X 9P pressed 13 spline Yamaha, fits 40-60 or so, nice prop, $ 130
623) 12 1/2" X 13P MW 900849, pressed 13 spline OMC hub, painted black stainless, shows some age and wear, $ 80
624) 11 3/4" X 13P Turbo Hot Shot, pressed 13 spline OMC hub, looks new, never used, $ 200
625) 12 1/2" X 13P MW 013024, pressed 13 spline OMC hub, nice used prop, $ 100
626) 12 1/2" X 13P MW 013024, pressed 13 spline OMC hub, nice used prop, $ 100
627) 12 1/4" X 15P MW, pressed 13 spline OMC hub, painted black stainless, shows wear, $ 50
628) 12 1/4" X 15P, pressed 13 spline OMC hub, painted black stainless, decent used prop, $ 60
629) 11 3/4" X 16P Stiletto 22316, pressed 13 spline OMC hub, looks new, never used, $ 200
630) 11 3/4" X 17P MW 390851, pressed 13 spline OMC hub, painted black stainless, excellent prop, $ 110
631) 11 3/4" X 17P MW 390851, pressed 13 spline OMC hub, painted black stianless, excellent prop, $ 110
633) 11 3/4" X 17P MW 390851, pressed 13 spline OMC hub, painted black stainless, excellent prop, $ 110
634) 11 1/4" X 21P MW, pressed 13 spline OMC hub, repitched from a 19, new hub, looks new but used, $ 200
635) 10 3/4" X 17P MW, pressed 13 spline OMC hub, new hub, 386980, reconditoned, painted black stainless, $ 100
636) 12 1/4" X 12P, pressed 13 spline OMC hub, painted black stainless, reconditioned but shows some age, $ 60
637) 11 3/4" X 17P MW, pressed 13 spline OMC hub, painted black stainless, 386980, nice prop, $ 100
638) 12 1/2" X 13P MW, pressed 13 spline OMC hub, 013024, nice used older prop, $ 100
639) To be determined
640) 11 3/4" X 15P MW, pressed 13 spline OMC hub, 013082, very nice used prop, $ 120
712) Aluminum 12 1/4" X 9P, 9G Yamaha prop, pressed 13 spline Yamaha hub, shows wear, $ 15
713) Aluminum 11 1/2" X 13P, pressed 13 spline Suzuki 4 stroke/Evinrude 4 stroke, fits Yamaha as well, looks new, $ 50
714) Aluminum 12 1/4" X 10P Michigan Wheel, pressed 13 spline Yamaha hub, very nice prop, $ 50
715) Aluminum 12 1/2" X 8P, pressed 13 spline Merc hub, 48-42738, shows age but blades are straight, $ 25
716) Aluminum 12 1/2" X 8P, pressed 13 spline Merc hub, shows age but decent, $ 20
717) Aluminum 11 1/2" X 14P, pressed 13 spline Merc hub, fits 40-60 hp or so, very nice prop, $ 40
719) Aluminum 11 1/2" X Pitch unknown, pressed 13 spline OMC hub, fits 40-60 hp or so, shows wear, $ 10
720) Aluminum 11 1/4" X Pitch unknown, pressed 13 spline OMC hub, fits 40-60 hp or so, shows wear, $ 10
721) Aluminum 12" X Pitch unknown, pressed 13 spline OMC hub, fits 40-60 hp or so, shows wear, $ 10
726) Aluminum 11" X 9P, fits 9.9-15hp OMC, pressed 13 spline OMC hub, 174817, looks new, $ 30
727) Aluminum 9 1/2" X 8 5/8P, pressed 8 spline Yamaha, nice prop, $ 30
766) 12 1/4" X 15P, pressed 13 spline OMC, new, never used, 390850, fits 40-60 hp or so, $ 200
768) Aluminum 11 1/2" X 13P, pressed 13 spline OMC 4 stroke and Suzuki 4 stroke hub, 40-50 hp or so, nice prop, $ 40
769) 10" X 15P, Stainless, pressed 14 spline OMC, 390730, new, never used, fits 20-35 hp OMC or so, $ 150
770) Aluminum 8 1/2" X 8P Michigan Wheel, pressed 12 spline, 142103, new, never used, T 8 1/2" X 8P, TBD
771) Aluminum 2 blade 9" X 10P, pressed 13 spline OMC very small prop, 386670, new, never used, TBD
772) Aluminum 9" X 9P, pressed 13 spline very old style OMC hub, 389068 and 311434, new, never used, just been sitting, TBD
773) Aluminum 9 3/4" X 6.5P Quicksilver, pressed 8 spline hub, 48-42524-6.5, new, never used, TBD
774) Aluminum 10" X 5P, pressed 13 spline OMC hub for 9.9hp-15hp or so, 386669, new, never used, TBD
775) Aluminum 9" X 11P, pressed 13 spline OMC hub for 9.9hp-15hp or so, 174817, new, never used, TBD
776) Aluminum 9 1/2" X 10P, pressed 13 spline OMC hub for 9.9hp-15hp or so, 174950, new , never used, TBD
777) Aluminum 10" X 5P, pressed 13 spline OMC hub for 9.9hp-15hp or so, new, never used, TBD
778) Aluminum 9" X 10P, pressed 13 spline OMC older style hub, 763589, new, never used, TBD
779) Aluminum 9.2" X 12P, pressed 13 spline OMC older style hub, 389944, new, never used, TBD
780) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
781) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
782) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
783) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
784) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
785) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
786) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
787) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
788) Aluminum 9 1/4" X 11P, pressed 13 spline OMC older style hub, 322011 and 388883, new, never used, TBD
789) Aluminum 8" X 4 1/2P, very old OMC prop, no hub, 310208, new, never used, TBD
790) Aluminum 8" X 4 1/2P, very old OMC prop, no hub, 310208, new, never used, TBD
791) Aluminum 8" X 4 1/2P, very old OMC prop, no hub, 310208, new, never used, TBD
792) Aluminum 8" X 5 1/2P, very old OMC prop, no hub, 315858, new, never used, TBD
793) Aluminum 8" X 5 1/2P, very old OMC prop, no hub, 315858, new, never used, TBD
794) Aluminum 7 1/2" X 6 1/2P, very old OMC prop, no hub, 5034197, C610, new, never used, TBD
795) Aluminum Unknown, very old OMC prop, no hub, 314806, new, never used, TBD
796) Aluminum 6 3/8" X 5 1/2P, LH, very old OMC prop, no hub, new, never used, TBD
797) Aluminum Unknown Michigan Wheel, very old OMC prop, no hub, 310208, shows age but never used, TBD
798) Plastic 7 1/2" X 6P, LH, very old OMC prop, no hub, 318487 on prop, 0318487 on box, new, never used, TBD
799) Plastic 7 1/2" X 6P, LH, very old OMC prop, no hub, 318487 on prop, 0318487 on box, new, never used, TBD
800) Aluminum 2 blade 6 1/8" X 6 1/4P, very old OMC prop, no hub, 203919, new, never used, TBD


Props that fit Yamaha 75hp-130hp, Mercury 75-130, Honda 90-130, Suzuki 90-140 (four strokes only on Suzukis). They are listed below by what type of hub style they have.

Aftermarket, slip hub style and pressed in hub style

65) 4 Blade 13" X 19P, recon, rehubbed, pressed Mercury style hub, looks brand new, $ 375
66) 4 Blade 13" X 20P, pressed Mercury style hub, looks brand new, $ 350
200) 13" X 21P Apollo XHS by Michigan Wheel, flo torq style hub not included, 993146, excellent prop, $ 220
232) 4 Blade 13 1/2" X 13P Solas, pressed Mercury style hub, uses Mercury front style washer, excellent prop, 9453-135-13, $ 290
353) Aluminum 13 3/4" X 13P Solas, flo torq hub not included, 9411-138-13, shows age and wear, $ 15
356) Aluminum 13 3/4" X 13P Michigan Wheel Vortex, flo torq hub not included, nice prop, $ 30
357) Aluminum 13 3/4" X 13P Solas, flo torq hub not included, 9411-138-13, nice prop, $ 30
359) Aluminum 13 3/4" X 13P Solas, flo torq hub not included, shows use, $ 20
360) Aluminum 13 3/4" X 13P Solas, flo torq hub not included, 9411-138-13, shows some wear but decent, $ 20
366) Aluminum 13 1/2" X 17P, pressed Merc style that uses washer, shows age and wear, $ 10
368) Aluminum 14" X 21P, pressed Yamaha style hub, nice prop, $ 50
369) Aluminum 12 1/2" X 23P, flo torq hub not included, shows some wear, $ 20
370) Aluminum 13 3/4" X Pitch unknown, flo torq hub not included, nice, $ 20
371) Aluminum 13 1/4" X Pitch unknown, pressed Merc style that uses washer, shows wear, $ 15
372) Aluminum 14" X Pitch unknown, flo torq hub not included, nice, $ 20
401) 4 Blade 13" X 17P Solas, pressed Yamaha style, 3453-130-17, looks new, $ 300

402) Pair of 13 1/4" X 15P Powertech, goes with prop number 403, pressed Yamaha style hub, SF115NRS3R15P, brand new, never used, $ 700/pair
403) Left hand prop that goes with prop 402, SF115NRS3L15P

404) Left Hand 13 3/4" X 17P Powertech, pressed Yamaha hub, SF115NRS3L17P, brand new, $ 300
406) 4 Blade 13 1/4" X 19P Powertech, pressed Yamaha hub, SF115PTR4R19P, brand new, $ 400
415) Aluminum 13 3/4" X 15P, flo torq hub not included, reconditioned, looks new, $ 60
455) Aluminum 13" X 21P Michigan Wheel, pressed Yamaha style hub, blades are bent and show wear, good for spare, $ 15
456) Aluminum 12 5/8" X 21P Michigan Wheel, pressed Yamaha style hub, 101035, nice prop but 1 blade has very slight damage that won't affect it, $ 40
477) 13" X 19P Solas, pressed Yamaha hub, D3X13X19RN, very nice prop, $ 200
490) 4 Blade 13 1/2" X 13P Powertech, pressed Yamaha style hub, YM90SWW4R13, nice prop that shows very minor wear, $ 275
491) Aluminum 13" X 15P I believe, V1500, pressed Yamaha style hub, shows some wear, $ 20
493) 13" X 19P Michigan Wheel, pressed Mercury style hub w/ fhort front washer, MW 389510, stainless painted black, decent prop, $ 180
518) 13 1/4" X 17P Michigan Wheel Avenger, pressed Merc style hub, really nice used prop, 033164, $ 200
519) 4 Blade 13" X 18P Predator, pressed Merc style w/ short washer, shows some age and wear, blades straight, $ 190
520) 13 1/4" X 16P Powertech, pressed Suzuki hub, shows some age but nice, SZ140RED-16P, $ 180
521) Aluminum 14" X Pitch unknown, good for spare, flo torq style hub insert included but not front part, $ 10
526) Aluminum 13 1/2" X 15P Solas, pressed Yamaha style hub, shows lots of wear, $ 10
591) 14" X 12P Quicksilver, pressed Merc hub, decent used prop, 48-17312-12, $ 180
592) 14" X 13P Quicksilver, pressed Merc hub, decent used prop, 48-12606, $ 180
593) 4 Blade 13 1/4" X 13P Turbo, pressed Yamaha hub, extremely nice prop, $ 325
594) 13 1/4" X 15P Stiletto, pressed Merc hub, 11315 M1315, shows wear but blades straight, $ 140
595) 13" X 15P Michigan Wheel 103025, pressed Yamaha hub, shows wear on blade ends but straight, $ 120
596) 4 Blade 13 1/4" X 15P Turbo Flats 4, pressed Yamaha hub, looks new, does not look like it has been used, $ 350
597) 4 Blade 13" X 17P Powertech PFS4, M135PFS4R17, pressed Merc style, nice used prop, $ 270
598) 4 Blade 13" X 17P Solas, pressed Yamaha hub, prop looks new, $ 300
599) 13 1/2" X 17P, P668, pressed Merc hub w/ short washer, shows some wear but straight, $ 150
600) 13 1/4" X 18P Michigan Wheel, pressed Merc style, repitched from a 17, decent used prop, $ 180
601) 13 1/4" X 19P Michigan Wheel, pressed Merc hub w/ short washer, repitched from a 17, shows some wear but blades are straight, $ 140
602) 14" X 22P, pressed Yamaha hub, BMCA 5033329, shows some wear on blade edges but nice prop, $ 180
603) 4 Blade 14" X 23P, pressed Merc style on face, Yamaha style thrust washer, shows some wear on blade edges but straight, $ 220
604) 4 Blade 14" X 27P Mazco HP4, 7125, pressed Merc hub, shows very minor wear on blade edges, $ 400
674) Aluminum 13 1/2" X Pitch unknown but around 17 or so, pressed Merc hub w/ short washer, decent used prop, $ 20
675) Aluminum 13" X Pitch unknown but stamped 16 so probably 16, pressed Merc hub w/ short washer, nice uses prop, $ 20
676) Aluminum 13" X Pitch unknown but looks around 17 or so, pressed Merc hub, shows age and wear, $ 10
677) Aluminum 13" X Pitch unknown but looks around 17 or so, pressed Yamaha hub, shows wear and age, $ 10
678) Aluminum 13" X Pitch unknown but stamped 16 so maybe 16, pressed Merc hub w/ short washer, nice used prop, $ 20
679) Aluminum 12 1/4" X Pitch unknown but stamped 16 so maybe 16, pressed Merc hub w/ short washer, decent used prop, $ 20
680) Aluminum 13 1/4" X 17P Quicksilver, flo torq hub not included, looks new, $ 70
683) Aluminum 12 3/4" X 19P, pressed Merc hub w/ short washer, good prop for a spare, shows age and wear, $ 10
684) Aluminum 13" X 19P, pressed Merc hub w/ short washer, 686265, extremely nice prop, $ 50
754) 13 1/2" X 15P Solas, pressed Yamaha style hub, D3X13 1/2 X 15RN, shows some wear but blades are straight, $ 150
759) Aluminum 13 1/4" X 17P Solas, pressed Mercury style hub, 1411-133-17, nice prop, $ 50


Yamaha Props (fits all the others as well)

53) 13" X 23P, 23K Yamaha prop, pressed Yamaha hub, nice prop, $ 200
84) 4 Blade 13 3/4" X 18P, Yamaha M18, pressed Yamaha style hub, looks new, $ 325
173) Left Hand 13 1/4" X 16P, KL16 factory stainless Yamaha prop, pressed Yamaha hub, shows very minor wear, $ 200
240) 4 Blade 13 3/4" X 26P, pressed Yamaha hub, shows a little wear, $ 200
399) 4 Blade 13 1/4" X 18P, K18 prop, pressed Yamaha hub, edges of blades show very minor wear, $ 250
408) 12 5/8" X 21P, 21K painted black stainless steel, pressed Yamaha hub, reconditioned, looks new, $ 200
411) 12 5/8" X 19P, 21K prop that has been repitched to a 19, pressed new Yamaha hub, painted black stainless steel, looks new, $ 200
483) 13 1/2" X 14P, 14K painted black stainless steel, pressed Yamaha hub, excellent prop, $ 220
528) 13 1/2" X 19P, 19K prop, pressed Yamaha hub, excellent prop, shows extremely minor wear on blade edges, $ 200
533) 4 Blade 13 3/4" X 20P, M20 prop, pressed Yamaha hub, shows wear but blades are straight, $ 160
535) 13 1/4" X 18P, pressed Yamaha hub, nice prop that shows minor blade edge wear, $ 200
559) 12 5/8" X 21P, 21K prop, pressed Yamaha hub, painted black stainless, nice prop, $ 200
758) 13 1/2" X 19P, 19K Yamaha prop, pressed Yamaha hub, nice prop but has crack on blade and needs fixed, $ 100
763) 13 1/4" X 14P, pressed Yamaha hub, nice prop that shows minor wear, $ 180


Mercury Props (fits all the others as well)

161) 14" X 19P brass Quicksilver 48-53898-19, pressed Mercury style w/ short washer, looks excellent, $ 200
345) Aluminum 14" X 9P, 48-854340-C1-9, pressed Merc hub that w/ short washer, shows some wear, $ 15
346) Aluminum 14" X 13P, 48-77340-C1-13, flo torq hub not included, shows wear, $ 10
347) Aluminum 14" X 9P, 48-854340, pressed Merc w/ short washer, nice prop, $ 30
413) 13" X 17P Mercury Vengeance, repitched from a 16P, 48-16986-16 but repitched, pressed Mercury hub w/ short washer, reconditioned and looks new, $ 250
496) 13 1/2" X 22P Mercury Laser 2 w/ PVS plugs, flo torq hub not included, 48-16992, shows some wear but straight, $ 170
517) 14" X 12P Mercury Vengeance, flo torq hub not included, 48-17312, shows age, pits, wear but useable and blades straight, $ 50
667) Aluminum 14" X 9P, pressed Merc hub w/ short washer, 48-854340, nice prop, $ 50
668) Aluminum 14" X 11P, pressed Merc hub w/ short washer, nice prop, $ 50
669) Aluminum 13 1/4" X 17P, pressed Merc hub w/ short washer, 48-65022, older prop that shows wear and age, $ 15
670) Aluminum 12 1/2" X 23P or 25P, cannot make it out, pressed Merc w/ short washer, 48-52012, decent used prop, $ 30
671) Aluminum 13 3/4" X 15P, flo torq hub not included, 48-77342, nice prop that looks new, $ 60
672) Aluminum 12 1/2" X 23P, pressed Merc hub w/ short washer, decent used prop, $ 30
755) 13 1/2" X 22P Mercury Laser 2 w/ PVS, flo torq hub not included, 48-16992, shows wear but blades are straight, $ 130


Honda Props (fits all the others as well)

756) 13 1/4" X 19P, pressed Merc style hub, nice prop that shows very minor wear, $ 190
757) 13 1/4" X 19P, pressed Merc style hub, nice prop that shows very minor wear, $ 180


15 Spline Suzuki Props (wont fit 2 stroke suzukis, will fit 4 stroke suzukis)

135) Pair of 14" X 18P Suzuki props, looks new, goes with prop number 136, pressed hub, $ 500 for the pair.
136) Left hand prop that goes with number 135

198) 13 1/8" X 18p, new pressed hub, really nice prop, $ 200
275) Left Hand 14" X 20P, pressed Yamaha/Suzuki style, nice used prop, $ 190
522) 13 1/4" X 20P, pressed Suzuki style, excellent prop, $ 220


Props That Fit Suzuki 2 Stroke 75HP-115HP, 13 Spline

326) Aluminum 13" X 17P, pressed Suzuki 13 spline hub, nice prop, $ 40
341) Aluminum 13 3/4" X Pitch unknown, pressed 13 spline Suzuki style, shows wear, $ 10
342) Aluminum 13 1/8" X Pitch unknown, pressed 13 spline Suzuki style, shows wear, $ 10
343) Aluminum 14" X Pitch unknown, pressed 13 spline Suzuki style, shows wear, $ 10
355) Aluminum 13 3/4" X 13P, pressed 13 spline Suzuki style hub, shows age and wear, $ 20
361) Aluminum 13 3/4" X 13P, pressed 13 spline Suzuki style hub, shows some wear, $ 15
396) 4 Blade 13" X 15P Powertech, pressed 13 spline Suzuki style, SCD4R15PSZ140, looks new, $ 300
616) 4 Blade 12 7/8" X 19P, pressed 13 spline Suzuki style, " The Ski Prop", has a crack in blade and needs reconditioning, $ 100



Props That Fit Yamaha 150HP And Up, Mercury 135HP And Up, Mercruiser Alpha 1 Outdrives, Honda 150HP And Up, Suzuki 150HP And Up.
They are listed below by what type of hub style they have.


Aftermarket, Slip Hub Style And Pressed Hub Style

43) 14 3/8" x 21p ballistic, pressed mercury style hub w/ short washer, brand new, $ 350
95) 5 blade 13 3/4" X 23P, pressed mercury style hub, excellent prop, $ 350
141) 13 3/4" X 21P Powertech ym200q53r21p, pressed yamaha style hub, 9371385, 318-688-1970, excellent prop, $ 220
148) aluminum 15.8" x 15p solas, looks new, used once, 3511-158-15, pressed yamaha style hub, $ 80
150) left hand 14 5/8" x 23p quicksilver mirage 48-13705-23, nice prop, pressed mercury hub w/ short washer, $ 250
182) aluminum 14.8" x 19p solas, pressed merc style w/ short washer hub, says honda on it but made by solas, excellent condition, $ 80
183) 4 blade 15 1/4" X 11P Powertech, pressed mercury style, wbb4r11pcl200, decent prop, good for pontoon boats or underpowered boats, $ 200
186) 13 3/4" x 25p, quicksilver 48-11078, excellent prop, pressed mercury style hub w/ short washer, $ 200
188) 14 1/2" x 15p, quicksilver 48-16312, pressed mercury style hub w/ short washer, shows wear but decent, $ 100
209) 14 1/4" x 26p michigan wheel, new pressed mercury hub, just got back from prop shop, ssy-726-c, looks almost new, $ 220
210) 14 1/4" x 24p michigan wheel, mercury hubbed, very nice prop, $ 210
217) left hand 14 3/4" x 21p quicksilver mirage, pressed mercury hubbed, 48-13703a41, shows wear, $ 160
229) left hand 4 blade 15 1/4" x 18p powertech, pressed mercury hub, m200ofs4l18p, small crack on 1 blade, $ 100
246) 14 1/4" x 19P michigan wheel rapture, pressed mercury hub, 033076, nice prop, $ 200
247) 14" X 23P Protester, pressed mercury hub, decent prop, $ 180
249) 15 1/4" x 18p powertech ofx fancy blade prop, cly200ofx3r18p, pressed yamaha style hub, excellent prop, $ 270
252) 4 blade 14 1/2" x 19p cyclone, tbx style hub not included, 177232, shows wear but useable, $ 150
281) 14 1/4" x 15p michigan wheel rapture, pressed mercury style, 063030, nice prop, shows very little wear at blade ends that wont affect it, $ 190
284) 4 blade 13 1/4" x 12p powertech, repitched from a 13, sz200ptl413, pressed Suzuki hub, decent prop but shows wear, $ 200
314) aluminum 14 1/2" x 19p solas, flo torq hub not included, shows some wear but decent, $ 25
318) 16" X Pitch unknown aluminum michigan wheel big ear prop, large diameter, looks like a 11-13 pitch or so, pressed mercury style hub with short washer, decent prop, $ 20
384) left hand 4 blade 14" x 21p cyclone, flo torq not included, 763947, looks new, $ 300
385) left hand 14 1/2" x 19p aluminum solas, flo torq not included, 9512-145-19, looks new, $ 80
386) 14 1/4" x 21p aluminum michigan wheel, flo torq not included, 832832a45, looks new, $ 90
387) 14 1/4" x 21p aluminum solas, pressed mercury style, looks new, $ 90

388) pair of 14 1/2" x 21p viper, flo torq not included, goes with prop 389, 763922, pair looks brand new, $ 600 for the pair
389) left hand prop that goes with 388, 763923

390) left hand 15" x 15p, flo torq not included, 763963, looks new, $ 225
391) left hand 14 3/4" x 20p viper, flo torq not included, 763921, looks new, $ 225
392) left hand 14 3/4" x 20p viper, flo torq not included, 763921, looks new, $ 225
393) left hand 14 3/4" x 18p viper, flo torq not included, 763917, looks new, $ 225
394) left hand 14 1/4" x 21p michigan wheel rapture, pressed mercury style that uses short washer, 033079, nice prop, $ 200
397) 14 3/4" x 20p solas, pressed yamaha style, very nice prop that shows very minor wear, e3x14 3/4 x 20 rtr, $ 200
407) left hand 14 1/4" x 17p powertech, pressed yamaha style hub, ym200ptc3l17p, brand new, $ 300
422) left hand 4 blade 14 1/4" x 17p solas, pressed yamaha hub, shows some wear on blade ends, could use a reconditioning, $ 150
450) 14 1/4" x 21p aluminum michigan wheel, flo torq hub not included, nice prop, $ 50
451) 4 blade 14" x 20p aluminum michigan wheel vortex, flo torq hub not included, 992204, nice prop, $ 80
457) 14 1/2" x 15p solas, pressed yamaha style hub, new prop that has not seen water, $ 300
458) Aluminum 15 1/2" X 18P Quicksilver prop, 48-38014, repitched to an 18 from a 19, pressed mercury style hub with short washer, reconditioned, $ 80

459) pair of 14 1/2" x 25p quicksilver mirage, pressed merc style with short washer, 48-13706, goes with prop 460, older props that were sitting around and never used, $ 600 for the pair
460) left hand prop that goes with 459, 48-13707

474) pair of brand new 14 1/2" x 15p solas, pressed mercury rubex style w/ short washer, 9531-145-15, goes with prop 475, new pair, never used, $ 600 for the pair
475) left hand prop that goes with prop 474

485) 15 1/2" x 17p michigan wheel apollo xhs, uses flo torq hub and insert is already in, 993023, excellent prop, $ 250
486) 14 1/4" x 22p turbo, pressed mercury style hub, new hub, excellent prop that looks new, $ 220
499) aluminum 14.8" x 17p solas, pressed mercury style hub w/ short washer, looks almost new, 9511-148-17, $ 80
500) aluminum 14 1/2" x 19p, flo torq hub not included, nice used prop, $ 50
501) 14 1/4" x 19p stiletto, pressed yamaha style hub, 10319, y1419, nice used prop that shows minor blade wear, $ 180
502) 14 3/4" x 21p, flo torq hub not included, similar to a mirage, excellent prop, $ 230
503) 13 3/4" x 21p quicksilver, pressed mercury style hub w/ short washer, decent older prop, shows some blade wear, $ 150
504) pitch to be determined, pressed mercury style hub, nice prop, $ 200
505) left hand 15.3" x 19p quicksilver thunderbolt w/ pvs, flo torq hub not included, excellent prop that looks new, $ 300
523) 15 3/4" x 14p quicksilver mirage, pressed mercury hub w/ short washer, shows some wear, repitched from a 15p, $ 180
572) 14 1/4" x 13p turbo, pressed merc hub w/ short washer, looks new, $ 230
574) 14 1/2" x 15p quicksilver, pressed merc stle hub w/ short washer, 48-16312, nice used prop, $ 190
575) left hand 15 3/4" x 15p quicksilver mirage, flo torq hub not included, 48-19841, nice used prop, $ 280
577) 14 1/4" x 19p turbo, pressed yamaha style hub, shows some wear on blade edges but straight, $ 170
578) 4 blade 14 1/4" x 19p turbo, pressed merc style hub w/ short washer, blades damaged and needs reconditioning, 14219-r4, $ 100
579) 14" x 19p quicksilver, pressed merc hub w/ short washer, 48-16316, shows some age and wear, $ 150
580) 15 1/2" x 19p michigan wheel, pressed merc style hub w/ short washer, ssm-354-c, very nice used prop, $ 200
581) 14 1/2" x 17p quicksilver, flo torq hub not included, 48-16314 but repitched to a 17 from a 19, 1 blade damaged and needs reconditioning, $ 60
582) left hand 16" x 19p solas lexor plus, pressed rubex style/merc style w/ short washer, looks new, $ 300
583) left hand 15 1/4" x 19p, flo torq not included, extremely nice prop, $ 220
584) Left Hand 14 1/2" X 21P, looks like 14.5 diamter or so, pressed merc style hub w/ small thrust washer, shows some wear on blade edges, $ 150
585) 13 1/2" x 23p quicksilver, 48-75724, pressed merc style w/ short washer, nice used prop, $ 190
586) 14 1/4" x 21p stiletto, pressed yamaha style hub, 30321, looks new, $ 250
589) 14 1/4" x 23p stiletto, pressed merc hub w/ short washer, looks new, dont think its ever been used, 10323 m1423, $ 250
590) 4 blade 14 3/4" x 25p turbo, pressed merc style on face, yamaha style thrust washer, looks new, dont think its ever been used, $ 350
656) Aluminum 16" X 15P, pressed merc hub w/ short washer, m91-15sp propco, nice prop, $ 50
657) aluminum 13 3/4" x 21p michigan wheel 031026, pressed merc hub w/ short washer, nice used prop, $ 50
658) aluminum 14 1/2" x 17p michigan wheel 031024, pressed merc hub w/ short washer, excellent prop that does not look used, $ 80
710) 14" x 21p solas, pressed yamaha style hub, shows some wear on blade ends, $ 100
746) Aluminum 14' X 19P, Pressed Yamaha Style Hub, Nice Used Prop, 101028, $ 50


yamaha style hubbed props

109) pair of michigan wheel rapture 14.25" x 15 pitch, paired with prop 110, 103044 part number, really nice props, $ 550 for the pair, recently re-hubbed
110) left hand prop that goes with number 109, part number 103045

117) pair of factory yamaha 14 1/2" x 23m, 23 pitch prop, pressed hubs, paired with number 118, $ 500 for the pair
118) goes with number 117, left hand 14 1/2" x 23ml

144) 14 1/2" x 21p, 21m yamaha prop, pressed yamaha style hub, shows some wear, $ 140

146) Pair of 14" X 16P Powertech props, pressed hub, goes with number 147, cly200ptc3r16p, 9454117, 319-688-1970, extremely clean pair, $ 500 for the pair
147) left hand prop that goes with number 146, ym200ptc3l16p, 9339737, 318-688-1970

172) 14 1/2" x 19p, yamaha 19t prop, pressed yamaha style hub, nice factory stainless painted black prop, $ 180

261) pair of 13 3/4" x 19p, m2 painted black stainless steel, nice pair of props, pressed yamaha hub, $ 400 for the pair
262) left hand prop that goes with prop number 261, ml painted black stainless steel

280) 15 3/4" x 13p, 13m prop, pressed yamaha style hub, painted black stainless series but mostly silver now, nice prop, $ 180
381) left hand 15 3/4" x 15p saltwater series 2, pressed yamaha hub, looks new, $ 280
382) left hand 15 1/4" x 19p, 19ml prop, pressed yamaha hub, nice prop, $ 200
383) 14 1/2" x 19p, pressed yamaha hub, painted black stainless steel 19t prop, looks new, $ 220
427) 14" x 19p aluminum, pressed yamaha hub, reconditioned, $ 75
430) left hand 13 3/4" x 17p, 17ml prop, pressed new yamaha hub, very nice prop, $ 200
431) left hand 13 3/4" x 19p, 19ml prop, pressed yamaha hub, nice used prop that shows some age, $ 180
432) left hand 13 3/4" x 19p, 19ml prop, presed yamaha hub, nice used prop that shows some age, $ 180
470) 15 1/4" x 19p, 19m prop, pressed yamaha hub, shows some wear on some of the blade ends but straight, $ 190

506) pair of aluminum 14 1/2" x 17p, 17m props, pressed yamaha hubs, show some wear but useable, great for spares, goes with prop 507, $ 100 for the pair
507) left hand prop that goes with prop 506, 17ml prop

508) aluminum 14 1/2" x 17p, 17m prop, pressed yamaha style hub, used prop without any wear, $ 80
509) 14 1/2" x 23p, 23m prop, pressed yamaha hub, end of blades show some wear but straight, $ 200
534) 13 3/4" x 17p, 17m, pressed yamaha hub, nice prop that shows minor wear, painted black stainless, $ 170
553) left hand 15 1/4" x 17p, repitched to 17 from a 15ml, pressed yamaha hub, shows some wear, $ 125
554) 13 3/4" x 17p, 17m prop, pressed yamaha hub, painted black stainless, nice blades but looks like diamter has worn down a bit, $ 100
556) 14" x 19p, 19m prop, pressed yamaha hub, painted black stainless, looks barely used, $ 200

557) pair of 13 3/4" x 17p props, 17m and 17ml props, goes with prop 558, pressed yamaha hub, nice used pair, $ 400 for the pair
558) goes with prop 557, 17ml prop, pressed yamaha hub

655) aluminum 14 1/2" x 17p, 17m yamaha prop, pressed yamaha hub, decent used prop, 1 blade bent up a little but easily straightened, $ 30
708) 15 1/4" x 17p, 17m yamaha prop, reconditioned and looks new, pressed yamaha hub, $ 390
709) 15 1/4" x 17p, 17m yamaha prop, new hub, shows some wear on blade edges but nice, pressed yamaha hub, $ 240

747) Pair of 13 3/4" X 17P, Yamaha 17M Prop, Goes with Prop 748, Painted Black Stainless, Nice Used Pair, Shows Minor Wear On Blade Edges But Nice, $ 350 For The Pair
748) Left Hand Prop That Goes With Prop 747, 17ML Prop


Mercury Props

47) 14" X 21P Quicksilver Laser 2 pair, pair with nubmer 48, $ 500 for the pair
48) Counter rotating with number 47

125) pair of mercury mirage plus 14 3/8" x 27p, 27 pitch props, uses flo torq hub style, no hubs, paired with number 126, with pvs plugs, 48-18280 part number, $ 600 for the pair
126) goes with number 125, left hand, part number 48-18281

152) 14 3/8" x 27p pair of quicksilver mirage, goes with prop number 153, 48-18280-27, looks new, pressed hub, $ 600 for the pair
153) left hand prop that goes with number 152, 48-18281-27

165) 14 1/2" x 26p mercury racing prop, mercury chopper prop, pressed mercury hub, 48-89858-26, nice prop, $ 400

189) pair of 4 blade 14" x 19p mercury offshore series (vensura), goes with prop number 190, 48-825900, no pvs plugs, flo torq style hubbed, really nice pair of props, $ 500 for the pair
190) left hand prop that goes with prop 189, pvs plugs, 48-825901, really nice prop, says vensura on this prop

191) pair of 4 blade 14" x 23p mercury offshore series props, same as vensura, both have pvs plugs, flo torq style hubbed, 48-825906, they both look new, $ 600 for the pair
192) left hand prop that goes with prop 191, 48-825907

213) 13 3/4" x 21p mercury vengeance, 48-16318, flo torq hub not included, decent prop, $ 180
214) 14" x 19p mercury, pressed merc hub, 48-88440-19, big ear prop, decent prop, edges show a little wear, $ 160
263) 14" x 19p, 48-16316a45 19p, flo torq hub not included, decent prop that look like it has had cupping added, $ 180
283) 14 1/2" x 15p, pressed mercury style hub w/ short washer, 48-93272, shows some wear, $ 150
471) 14" x 19p laser 2, flo torq hub not included, 48-16544, shows some wear on some of the blade ends, $ 170
560) 5 blade 13 1/2" x 17 pitch mercury high five prop w/ pvs, 48-821154, very nice prop, $ 350
561) 14 1/2" x 17p, pressed merc w/ short washer, new hub, shows some wear but nice prop, $ 180
563) left hand 4 blade 14" x 19p mercury vensura w/ pvs, flo torq hub not included, 48-825901, shows some age but nice, $ 230
565) 14 1/2" x 25p mercury mirage plus w/ pvs, flo torq hub not included, 48-13706, nice straight blades but has some damage on exhaust lip, $ 150
567) 14 3/8" x 27p mercury mirage plus w/ pvs, flo torq hub not included, 48-18280, extremely nice prop, $ 300

568) pair of 14 3/8" x 27p mercury mirage plus w/o pvs, flo torq hub not included, goes with prop 569, nice used pair, $ 500 for the pair
569) left hand prop that goes with prop 568, flo torq hub not included, 48-18281

570) 14 1/2" x 19p mercury cleaver style prop, pressed merc hub w/ short washer, 48-89800, nice used prop, $ 230
641) 14 1/2" X 22P racing prop, 48-89856, pressed merc hub, no weed cutters, $ 300
642) 14 3/4" X 26P racing prop, repitched by mazco from a 24 pitch, was 48-77320-24, mazco 1660, $ 400
660) aluminum 13 3/4" x 21p, flo torq hub not included, 48-78122-21, decent used prop, $ 30
661) Aluminum 14 1/2" X 22P, pressed merc hub, shows age and wear, $ 20
662) Aluminum 13 1/2" X 25P, pressed merc hub, 48-73514-25, nice used prop, $ 40
663) aluminum 13 3/8" x 25p, flo torq hub not included, 48-78126, excellent prop that looks new, $ 80
664) aluminum 16" x 13p, pressed merc hub w/ short washer, 48-78114, nice used prop, $ 50
665) Aluminum 15" X 21P, pressed merc hub w/ short washer, nice used prop that shows a little wear, $ 40
666) aluminum 16" x 13p, pressed merc hub w/ short washer, 48-79568-13, nice prop, $ 50
760) 14" X 19P Mercury Vengeance, flo torq hub not included, 48-16316, nice used prop that shows some use, $ 160
761) 13 3/4" X 21P Mercury Vengeance, flo torq hub not included, 48-16318, nice prop that shows some use, $ 160
762) 13 1/2" X 21P Mercury Vengeance, flo torq hub not included, re-pitched from a 23 pitch, very nice prop, $ 200


Suzuki Props

Big Hub Suzuki Props (Will Fit Yamaha, Mercury, And Honda)

29) 14 1/4" x 20 pitch, suzuki $ 220

30) pair of 14 1/4" x 20 pitch, suzuki $ 350 as a pair with # 31
31) 14 1/4" x 20 pitch, suzuki, counter rotating.

32) 14 1/4" x 26 pitch, suzuki, $ 220
33) 14 1/4" x 18 pitch, suzuki, $ 220

271) 14 1/4" x 24p, suzuki, pressed suzuki style, shows some wear and age, $ 140
274) 14 1/4" x 20p, suzuki, pressed suzuki style, shows some wear but decent, $ 160
379) left hand 16" x 18 pitch suzuki, repitched from a 20, pressed suzuki style, 3x16x20l, nice prop, $ 160
380) left hand 16" x 23 pitch suzuki, pressed suzuki style, 3x16x23l, excellent prop that looks almost new, $ 220
426) 14 1/4" x 20 pitch, pressed suzuki style hub, very nice prop, $ 200
552) 14 1/4" x 22p, pressed merc style hub, used prop that shows some wear, $ 150


props that fit johnson/evinrude 75hp-130hp, 13 spline

218) 89948, pressed omc hub
219) 13 3/8" x 17p, 389948, pressed omc hub, shows some wear, $ 130
287) 14" X 15P, pressed omc hub, shows some age and wear, $ 120
288) 13 3/8" x 19p, pressed omc hub, painted black stainless, decent prop, $ 140
291) 13 3/4" x 11p, pressed omc hub, painted black stainless, 389792, nice prop, $ 130
336) 13 1/2" X Pitch unknown aluminum, pressed omc style, shows wear, $ 10
337) 13 1/4" X Pitch unknown aluminum, pressed omc style, shows wear, $ 10
338) 13 1/2" X Pitch unknown aluminum, pressed omc style, shows wear, $ 10
340) 14" X Pitch unknown aluminum, pressed omc style, decent prop, $ 15
374) 4 blade 13 1/4" X 17P powertech om140rxs-17p, pressed 13 spline omc style, end of blade tips show some wear and tips bent up a little, $ 150
420) 13" x 19p, pressed 13 spline omc style, nice prop, $ 200
439) 13 1/4" x 17p, pressed 13 spline omc style, ssc-517-2-c, new hub, nice used prop painted black stainless, shows some age, $ 160
445) 13 3/4" x 15p, pressed 13 spline omc style, shows some age and wear but blades are straight, $ 140
446) 13" x 19p, pressed 13 spline omc style, nice painted black stainless prop, $ 200
452) 13" x 19p, pressed 13 spline omc style, nice painted black stainless prop, looks new, $ 200
453) 13 1/2" x 15p aluminum, 13 spline pressed omc style, 785182, reconditioned and looks new, $ 90
480) 13 1/2" x 17p ballistic, 13 spline pressed omc style, 3305031, shows very minor wear on blade ends, $ 150
529) 13 1/4" x 17p solas, pressed 13 spline omc style, excellent prop that looks almost new, $ 200
605) 13 3/4" x 11p mw 389792, pressed omc hub, painted black stainless, shows some age and wear but decent, $ 180
606) 13 3/4" x 13p mw, pressed omc hub, painted black stainless, prop looks new, $ 210
607) 13 3/4" x 13p mw, pressed omc hub, painted black stainless, shows some age but decent, $ 160
608) 13 3/4" x 15p mw 389949, pressed omc hub, painted black stainless, looks new, $ 220
609) 13 3/4" x 15p mw 013028, pressed omc hub, shows wear and age, blades worn down where diamteris like 13" now, $ 90
610) 13 3/8" x 17p mw 389948, pressed omc hub, shows wear on blade tips, $ 100
611) 13 7/8" x 17p mw 176572, pressed omc hub, sst, shows age and wear, $ 100
612) 13 1/2" x 18p mw, pressed omc hub, shows some age and wear but decent, $ 180
613) 13" x 19p mw 389510, pressed omc hub, painted black stainless, shows some age and wear, $ 120
614) 4 blade 13 1/4" x 19p stiletto, 24419 01319, pressed omc hub, nice prop that shows minor wear on blade edges, $ 250
615) 13" x 19p mw 389510, pressed omc hub, shows some age and wear but decent, $ 160
618) to be determined
619) to be determined
620) to be determined
685) aluminum 13" x 19p mw 011004, pressed omc hub, nice used prop, $ 40
686) Aluminum 13" X Pitch unknown, pressed omc hub, shows age and wear, $ 10
687) aluminum 13" x 19p mw 011004, pressed omc hub, shows age and wear, 1 blade slightly bent, $ 15
688) Aluminum 13 1/2" X Pitch unknown, pressed omc hub, shows alot of age, $ 10
689) aluminum 13 1/4" x 17p mw 011003, pressed omc hub, shows age and wear, $ 15
690) Aluminum 13 1/2" X Pitch unknown, pressed omc hub, bp43114, nice prop, $ 20
691) Aluminum 13 1/2" X Pitch unknown, pressed omc hub, shows age and wear, $ 10
693) aluminum 14" x 13p mw 011001, pressed omc hub, looks new, $ 60
694) aluminum 14" x 13p, new hub, pressed omc hub, nice prop, $ 50
695) aluminum 13 3/4" x 15p, pressed omc hub, 391198, shows a lot of wear and age, $ 5
696) aluminum 13 1/2" x 15p, pressed omc hub, older prop that shows wear, $ 10
698) aluminum 13 1/4" x 17p, pressed omc hub, shows wear and age, $ 10
699) aluminum 13 1/4" x 17p solas, pressed omc hub, 2411-133-17, decent used prop that shows some wear, $ 20
701) aluminum 13 1/4" x 17p, pressed omc hub, shows wear on blades, $ 10
704) aluminum 13" x 19p, pressed omc hub, older prop that shows wear, $ 5
706) aluminum 13 1/4" x 19p, pressed omc hub, nice used prop, $ 30
764) Aluminum 14" X 13P, pressed 13 spline OMC hub, 391668, new, never used, $ 100
767) Aluminum 14" X 19P, pressed 13 spline OMC hub, 176215, new, never used, $ 100


props that fit johnson/evinrude 150hp and up, 15 spline

81) 14 1/2" X Pitch unknown, large OMC aluminum prop, pressed OMC hub, $ 30
108) left hand 14.5" x 17 pitch, repitched from a 19, michigan wheel 390821, pressed omc hub, nice prop, $ 150
140) 14 1/2" x 17p, repitched from a 19p, michigan wheel 389924, pressed omc hub, normal wear, $ 170
220) 4 blade 13 3/4" x 20p turbo-o, pressed omc small hub 15 spline, excellent prop, $ 300
221) 4 blade 13 1/4" x 27p, michigan wheel shooter, pressed omc small hub 15 spline, blades show some wear, 431719, $ 200
223) 14 1/4" x 21p michigan wheel, 389923, pressed omc hub, blades show some wear, $ 140
224) 15 1/2" x 15p, was a 14 but repitched to a 15p, 390831, shows age, could use polishing, $ 100
227) left hand 14 1/2" x 19p, excellent prop, pressed omc hub, $ 200
228) left hand 14 1/2" x 20p michigan wheel raker, 398502, pressed omc hub, blades show minor wear, $ 160
268) 14 1/4" x 21p michigan wheel, 389923, shows some wear and age, pressed omc hub, $ 120
294) 14 1/2" x 19p michigan wheel, pressed hub, 389924, blade ends show wear but useable, $ 100
295) 14" x 17p raker, was 14 1/2" x 18p but has had some work done, 394752, nice prop, $ 140
296) 15" x 16p michigan wheel, needs hub replaced, pressed hub, 389925, decent prop, $ 50
298) 13 3/4" x 15p michigan wheel small hub, pressed 15 spline omc hub, 392261, repitched from a 13p, nice prop, $ 150
409) 14 1/4" x 21p stilletto, pressed omc hub, 20321 01421, shows minor wear on blade ends, $ 180
423) 15" x 17p, michigan wheel 391290, pressed omc style, shows some age and wear, $ 150
442) 14" x 16p, pressed omc style, nice prop, $ 200
443) 14" x 19p, pressed omc style, nice prop, $ 200
461) 4 blade 13 1/4" x 23p shooter, repitched from a 25, 431718 mw, 15 spline small pressed hub, extremely nice prop, $ 300
462) 14 1/2" x 19p aluminum, pressed omc style, 391201, looks new but has 1 blemish on blade end that wont affect it, $ 70
463) 15" x 16p michigan wheel, pressed omc style, 389925, stainless painted black, looks new, $ 200
464) left hand 14 3/4" x 17 sst, pressed omc style, 176616, stainless painted black, new prop, never used, $ 220
465) 14 1/2" x 19p michigan wheel, pressed omc style, 389924, older nice prop, $ 180
466) 14 1/2" x 19p michigan wheel, pressed omc style, 389924, older prop that shows some age but good, $ 170
467) left hand 14 1/4" x 21p michigan wheel viper, pressed omc hub, nice prop, blade edges show minor wear, $ 180

468) pair of 14 1/4" x 21p, pressed omc style, goes with prop 469, 389923, older pair that shows some wear and age, $ 300 for the pair
469) left hand prop that goes with prop 468, 390882

472) pair of 14 1/4" x 19p stiletto props, pressed 15 spline omc style, 20319 01419, goes with prop 473, nice pair that shows little wear on blades, $ 450 for the pair
473) left hand prop that goes with prop 472, 20219 01419

524) 4 blade 14" x 16p mach, pressed 15 spline small hub w/ diffuser ring prop, shows some wear, $ 180
539) 14 1/4" x 15p stiletto, pressed omc hub, 20315 01415, extremely nice prop, $ 220
540) left hand 14 3/4" x 19p viper, pressed omc hub, 176630, nice used prop, $ 180
541) left hand 15" x 15p, pressed omc hub, nice painted black stainless, 174927, $ 190
542) 14 1/2" x 17p michigan wheel, ssc 647, pressed omc hub, decent used prop, $ 170
543) 15" x 17p michigan wheel, pressed omc hub, 013044, nice used prop, $ 180
544) 15" x 17p michigan wheel, pressed omc hub, was a 19p but repitched to a 17, nice used prop, $ 180
545) left hand 15" x 17p michigan wheel, pressed omc hub, painted black stainless, 431930, really nice prop, $ 200
546) 15" x 17p michigan wheel, pressed omc hub, 391290, decent used prop that shows some wear on blade edges but straight, $ 150
547) left hand 14 1/2" x 19p michigan wheel, pressed omc hub, painted black stainless, 390821, really nice prop, $ 200
548) left hand 14 1/2" x 19p michigan wheel, pressed omc hub, painted black stainless, 390821, nice used prop, $ 190
549) left hand 14 1/2" x 19p michigan wheel, pressed omc hub, painted black stainless, 390821, nice used prop, $ 190
550) 14 1/4" x 21p michigan wheel, pressed omc hub, 387520, shows wear like it has lost some of its diameter, painted black stainless, $ 140
644) aluminum 15" x 17p michigan wheel 391200, pressed omc hub, broken blade, $ 10
647) aluminum 14 1/4" x 19p, pressed omc hub, repitched from a 21, decent prop, $ 30
648) aluminum 14 1/4" x 19p, 391201, pressed omc hub, decent used prop, $ 25
649) aluminum 14 1/4" x 21p, pressed omc hub, decent used prop, $ 30
650) aluminum 14 1/4" x 21p, 391202, pressed omc hub, nice prop that looks new, $ 80
651) aluminum 14 1/4" x 21p, 391202, pressed omc hub, nice prop that looks new, $ 80
652) aluminum 14 1/4" x 21p, 391202, pressed omc hub, decent prop but 1 blade has a little wear on the edge, $ 20
653) aluminum 14 1/4" x 23p, pressed omc hub, nice prop, $ 50
654) aluminum 14 1/4" x 23p, 391203, pressed omc hub, decent used prop, $ 25
749) 14 1/4" X 19P Stiletto Advantage 2, Pressed OMC Hub, 20319 01419, Nice Used Prop That Shows Minor Wear, $ 170
750) Aluminum 15 1/2" X 15P Michigan Wheel, 391535, Pressed OMC Hub, Shows Some Wear On Blade Edges But Very Useable, $ 30
765) Aluminum 14 1/2" X 21P, new, never used, pressed OMC hub, 391202, $ 120


Bravo 3 Props

447) 14 1/2" x 22 merc rh outer prop, 19 spline solid hub, $ 300

728) pair of 22 pitch, lh inner 48-823663, shows some blade wear but straight, goes with prop 729, $ 500 for the pair
729) rh outer prop that goes with prop 728, 48-823664, nice prop

730) pair of 22 pitch, lh inner 48-823663, blade edges show some wear, goes with prop 731, $ 350 for the pair
731) rh outer prop that goes with prop 730, 48-823664, shows some age and wear

732) pair of 24 pitch, lh inner 48-823665, nice used prop, goes with prop 733, $ 700 for the pair
733) rh outer prop that goes with prop 732, 48-823666, nice used prop

734) pair of 24 pitch, lh inner 48-823665, nice used pair, goes with prop 735, $ 600 for the pair
735) rh outer prop that goes with prop 734, 48-823666, nice used pair

736) pair of 24 pitch, lh inner 48-823665, nice used pair, goes with prop 737, $ 600 for the pair
737) rh outer prop that goes with prop 736, 48-823666

738) pair of 28 pitch, lh inner 48-823669, nice used prop, 1 small ding in 1 blade, goes with prop 739, $ 400 for the pair
739) rh outer prop that goes with prop 739, 48-823670, straight bladed used prop that shows burn marks in blades

740) pair of 30 pitch, lh inner 48-831867, nice used prop, goes with prop 741, $ 400 for the pair
741) rh outer prop that goes with prop 740, 48-831868, nice used prop but has small crack in 1 blade

742) single lh inner 28 pitch, 48-823669, nice used prop, $ 300
743) single lh inner 26 pitch, 48-823667, nice used prop, $ 300
744) single lh inner 26 pitch, 48-823667, used prop that shows blade wear on ends, could use reconditioning, $ 140
745) single rh outer 24 pitch, 48-823666, used prop that shows some wear, $ 200


undetermined props

525) 4 blade 14 1/2" x 17p, aluminum solas, no idea what it is, shows some wear, $ to be determined


volvo props

285) left hand 15 1/4" x 17 michigan wheel, pressed 17 spline hub, ssv-171-c, nice blades, shows age and some wear but very useable, $ 130



Name:  20170228_163351_zpsgxwylnhr.jpg
Views: 175
Size:  200.1 KB

Name:  20170228_163332_zpserzjhp4u.jpg
Views: 174
Size:  189.0 KB

Name:  20170228_163329_zpsgzlvozmc.jpg
Views: 172
Size:  190.6 KB

Name:  20170228_163324_zpsz7nubhuy.jpg
Views: 171
Size:  200.8 KB
Attached Images
    

Last edited by mattconrad; Today at 04:14 PM.
mattconrad is offline   Reply With Quote
Old 06-04-2014, 11:19 AM   #2
Senior MemberCaptains Club Member
 
Join Date: Oct 2003
Location: Pt. Pleasant NJ & OIB NC
Posts: 241
Default

Hello,
In need of a RH 15 1/4 x 19 yamaha prop. Is the one shown still available ? Please email a photo if it is to [email protected]

Thanks !
GREENBUNCH is offline   Reply With Quote
Old 06-24-2014, 11:45 AM   #3
Member
 
Join Date: Jun 2014
Posts: 33
Default

Do you have any aluminum cheap 14 1/4 21p props for an alpha 1 gen 2?
gbalaz is offline   Reply With Quote
Old 08-06-2014, 04:31 AM   #4
Senior Member
 
Join Date: May 2014
Location: south australia
Posts: 379
Default

do you have any counter rotating props for a 2004 df140.

22 pitch or above?
thestuz is offline   Reply With Quote
Old 08-14-2014, 05:34 PM   #5
Senior Member
 
Join Date: Jul 2013
Location: Bluffton, SC
Posts: 600
Default

Any 14 1/4 X 17 props for a mercury 150?
Evensteven is offline   Reply With Quote
Old 11-19-2014, 06:21 AM   #6
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

All messages replied to and 30 Props added 11/19!
mattconrad is offline   Reply With Quote
Old 12-08-2014, 10:28 AM   #7
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Bump
mattconrad is offline   Reply With Quote
Old 12-08-2014, 01:37 PM   #8
Admirals Club
 
Join Date: Aug 2005
Location: Sandwich, MA
Posts: 1,126
Default

Can you provide a close up shot of the blade wear on number 57? Thank you.
AntCoastie is offline   Reply With Quote
Old 12-10-2014, 07:50 AM   #9
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Quote:
Originally Posted by AntCoastie View Post
Can you provide a close up shot of the blade wear on number 57? Thank you.
Name:  20141209_062629_zps8e106323.jpg
Views: 159
Size:  19.7 KB
mattconrad is offline   Reply With Quote
Old 12-27-2014, 12:34 PM   #10
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Bump
mattconrad is offline   Reply With Quote
Old 01-14-2015, 06:30 AM   #11
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

I have about 10 more props that I will be adding soon.
mattconrad is offline   Reply With Quote
Old 01-26-2015, 08:06 AM   #12
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

bump
mattconrad is offline   Reply With Quote
Old 01-26-2015, 08:31 PM   #13
Admirals Club
iTrader: (1)
 
Join Date: Aug 2006
Location: Orlando, FL
Posts: 1,083
Trader Rating: 1 (100%+)
Default

I'm looking for one for my 250 etec. Maybe rebel 15.5"x17?
Seadawk is offline   Reply With Quote
Old 01-27-2015, 07:02 PM   #14
MemberCaptains Club Member
 
Join Date: Aug 2003
Posts: 57
Default

Pm sent
HAM IT UP is offline   Reply With Quote
Old 01-30-2015, 06:05 PM   #15
Member
 
Join Date: Jan 2015
Posts: 55
Default

Any 15x19 for 2001 Johnson 150?
bshattuck87 is offline   Reply With Quote
Old 02-04-2015, 05:56 AM   #16
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Quote:
Originally Posted by Seadawk View Post
I'm looking for one for my 250 etec. Maybe rebel 15.5"x17?
Prop number 82 below.

82) LARGE OMC STAINLESS MICHIGAN WHEEL 15 X17, $ 150
mattconrad is offline   Reply With Quote
Old 02-04-2015, 05:57 AM   #17
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Quote:
Originally Posted by bshattuck87 View Post
Any 15x19 for 2001 Johnson 150?
Not in that size.
mattconrad is offline   Reply With Quote
Old 02-04-2015, 07:35 PM   #18
MemberCaptains Club Member
 
Join Date: Sep 2005
Location: Kitty Hawk, NC
Posts: 57
Default

Do you have a stainless for a df115 Zuk?
dyingtofish is offline   Reply With Quote
Old 02-04-2015, 11:03 PM   #19
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Quote:
Originally Posted by dyingtofish View Post
Do you have a stainless for a df115 Zuk?
All of the Yamaha and Mercury props should fit the shaft of the DF115 Suzuki and work. Most Suzuki props that are factory though have larger diameters I believe.
mattconrad is offline   Reply With Quote
Old 02-20-2015, 08:43 AM   #20
Admirals Club
THT sponsor
Thread Starter
 
Join Date: Jul 2011
Posts: 1,725
Default

Going to be adding 25 more props next week!
mattconrad is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 08:58 PM.


©2009 TheHullTruth.com

Powered by vBulletin® Version 3.9.3.0
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.