The Hull Truth - Boating and Fishing Forum

The Hull Truth - Boating and Fishing Forum (https://www.thehulltruth.com/index.php)
-   The Parts Forum (https://www.thehulltruth.com/parts-forum-90/)
-   -   Anybody Have Bracket Mount for Garmin 2010, 3010 or 3210? (https://www.thehulltruth.com/parts-forum/1090850-anybody-have-bracket-mount-garmin-2010-3010-3210-a.html)

jackryan 06-09-2020 12:08 PM

Anybody Have Bracket Mount for Garmin 2010, 3010 or 3210?
 
I have a Garmin 3210C that I would like to mount at my lower station and I would like to find a bracket to mount it with. It seems like most people flush mounted these units, so I'm hoping that someone has a bracket laying around for one of these. The Garmin 2010, 3010 and 3210 were all the same size, so a bracket for any of these units should work.

Many Thanks!

John

jfwireless 06-09-2020 12:58 PM

I might have one, what is the distance between the two ears that connect to each side of the 3210. I have several bracket mounts, and have no idea which one fits the 3210.

Jim

jackryan 06-09-2020 10:24 PM

Jim,

When I flip the unit over and measure, it is just shy of 12.5 inches. (12 3/8" to be exact)

Thanks Jim

jfwireless 06-10-2020 08:52 AM

OK, sent you a PM, I have one that appears to be just shy of 12.5" between the two interior mounting ears that mates to the MFD.

Jim

jackryan 06-11-2020 03:08 PM

Bump

jackryan 06-13-2020 07:26 AM

The item I'm looking for is called a Bail Mount and has two knobs to screw the GPS into the mount, one on each side. If you have one of these from a 2010C, 3010C or 3210C it should work for me.

John

Raider Ron 06-13-2020 12:52 PM

Check eBay, there are some on there or just go to Home Depot or Lowe’s, buy a 2’ length of 2” wide aluminum flat bar.
Bend one up for the width of the unit, drill holes for mounting knobs and to mount bracket horizontal.
If you don’t have the 2 knobs, think they are 6mm thread and short bolts & washers will work.
Spray can black and no one will know the difference.
Probably $10-$15 out of your pocket and 1/2 hr labor.


All times are GMT -7. The time now is 09:05 PM.

Powered by vBulletin® Version 3.9.3.8
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.