ksisk

As the title says I have a set of two that we’re going to go on my old boat never got around to installing them before I sold the boat. $200 plus shipping. These are brand new never used.

ksisk

Bump

ksisk

Bump

ksisk

Bump

ksisk

Still available need to go!

VanW

I guess you need to get it the water and turn wrenches to adjust these?

ksisk

I would probably do my adjustments on the trailer. Yes you will need wrenches to make your adjustments.

liveaboard74

No you can adjust them on the trailer. I run a 10 inch set back jack plate with a 300 V Rod on it. Their easy. Loosen the side bolts put a jack under the motor crank it up. Simple.

OP you might want to list the set back . How far back they bring the motor.

Jack plate at least 4 inchs will pick you guys up 2 to 4 mph . Gets that motor up and back in cleaner water. I'm running 52 with a 24 foot walk around boat. Single motor. Guy around the corner has a 250 on a 25 foot fountain. I can outrun his butt. LOL Cruise at 38. They do make a difference.

DestinDan

PM sent

ksisk

These can be set up for either 2.5” or 5” of set back and straight or negative wedge. If you have any questions let me know.

ksisk

Sold