Notices

RocknReeln RocknReeln is offline

Senior Member

Visitor Messages

Showing Visitor Messages 1 to 10 of 23
  1. eggage1
    06-25-2019 02:45 PM
    Hi RnR:
    I just wanted to drop you a message.
    I had done a search and was lucky enough to see your post from 2011 about the symptoms of a bad low pressure fuel pump on a HPDI yamaha. The symptoms matched my engine's recent troubles exactly and your description of how to go about changing them was terrific.
    I changed my low pressure pumps in 40 minutes and the engine now runs like a sewing machine.

    Just wanted to say Thank You!

    Mike
  2. gasman059
    12-08-2017 12:45 PM
    Any pics of your contender dash- Please let me know if you still have them. Old thread but wanted to see your mod for ideas thx.
  3. red20
    07-20-2017 11:15 AM
    Can you send pictures of you cuddy removal. They are not hosted on photobucket anymore. I am planning on doing a similar rebuild to a 25.
  4. riggedand ready
    08-24-2015 06:13 AM
    Hi, Yes I do still have them.
    Andy
  5. BigG
    03-09-2015 06:17 AM
    Hey Rockn,

    I found and old post about repowering with F300's and saw that your current rig has f300's. I'm thinking about doing the the same... Can I ask you how it went and how much it cost you?

    Regards,
    Rudy
  6. DaveDTZ
    12-23-2014 08:10 AM
    Hey RocknReeln,
    I have noticed that you seem to have a good grip on the Yamaha HPDI VST filters for us DIYer's.... I just purchased a 2003 Pathfinder with a 03 VMAX hpdi 200hp. I has a brand new Yamaha factory sealed powerhead with only 20 hrs on it. All of the other engine components were the 03 originals. All that being said, motor runs great till WOT then dies down....From what ive read, sounds like a filter needs to be changed in the VST. Do you have a parts list for all of the filters that need changing? I figured I'd as since you prob have the info handy.
    thanks in advance!
    Dave Tanner
  7. RocknReeln
    10-23-2014 07:42 AM
  8. Castrohasanafro
    10-23-2014 05:53 AM
    S&E Custom in S. Miami if I remember correctly. I negotiated with him for a little while and got it down. Im sure you could to. I do have a picture, where can I send it to?
  9. CW2008
    09-26-2014 01:07 PM
    I have a 2008 clarion stereo and the remotes (2 of them) are starting to malfunction. I need to replace with the same shape remote (round). Not sure if mine is compatible or if it is the same diameter. Do you know the diameter of the remotes? If you still have them I will get the model number of mine to see if they are compatible. These look newer than mine. Thanks
  10. JerseyDepths
    09-03-2014 08:44 AM
    Hi RocknReeln,

    I noticed some of your posts about your Yamaha HPDI engines and how you have been maintaining them. I recently bought a boat with a 2004 Yamaha HPDI 250 outboard and wanted to know if you could give me some tips on how to properly maintain it.

    Thanks

About Me

  • About RocknReeln
    Location
    Miami, Florida
    Interests
    Fishing, Diving, Hunting
    Custom Rank
    Captains Club Member
  • Signature

    97' Contender 31
    2013 Yamaha F300's
    _________________

Statistics

Total Posts
Visitor Messages
General Information
  • Join Date: 01-22-2007
  • Referrals: 0

Friends

Showing Friends 1 to 5 of 5