Go Back  The Hull Truth - Boating and Fishing Forum > Members List
Reload this Page >

PalmettoTrooper's Profile

THT sponsor

PalmettoTrooper PalmettoTrooper is offline

Admirals Club

About Me


Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 05-09-2021 08:48 AM
  • Join Date: 02-16-2011
  • Referrals: 0


Showing Friends 1 to 5 of 5

Visitor Messages

Showing Visitor Messages 61 to 70 of 90
  1. 05-01-2014 05:05 PM
    hi there,

    I have a sailfish 2660 wac and was looking at putting some weld on rod holders down the rear hardtop vertical support anodized aluminium pipes to give somewhere to clear the rods when hooked up .Also some extra storage for rods when travelling.
    I am down in Australia and would need to get them shipped, I have a few contacts in the states to do this but just need to source the correct holders for the job. Do you have anything available and what would they cost. would be looking at 6 holders but I have a mate who is a metal fabricator and he has a few other customers and may need to order a larger qty.

    cheers Chris
  2. 04-28-2014 08:03 AM
    I would like to buy a custom rod holder. 8 rods, 60" long over all, plus mounting feet. I can fax you a sketch. Oversize shipping charges with UPS are okay.

  3. 04-10-2014 06:33 PM
    I'm looking to add a rod rack (approx. 30" with 5 rod holders) to the back of my helm seat (which is a box). Hard to explain, unless you have seen a Jones Brothers Bateau. I have a T-Top and the top extends over the seat. I would need a rack with the rod holders mounted on the rack around 30 degrees, so 7' or longer rods will not hit the rocket launchers or spreader lights. Is that something reasonably easy to do, if so, what kind of price?
  4. 04-06-2014 06:38 AM
    Can you make grab bar for leaning post?
  5. 04-04-2014 05:16 PM
    Hey just wanted to know if you were ever able to send me that transom rod holder?
  6. 04-02-2014 08:22 AM
    Do you have, or can you find, a clamp on aluminum rod holder for a 2" pipe?
  7. 03-25-2014 06:10 PM
    beautiful work!! we NEED a four rod transom mount holder!! the problem is space, even with a bracket there is not much room. do you mount any holders on flat stock that will mount flush with the transom. the boat is a 23' KenCraft Sea King with Armstrong bracket if that helps. also, the capt has a little crumbsnatcher running around that loves to tube! can you make the rodholder with a ski rope attachment point in the center? sorry, that's a lot of questions.
  8. 03-02-2014 10:59 AM
    Derek, give me a buzz and I'll hook ya up. Never heard from bubba but I'll take care of him.
    803 603 8176
  9. 03-02-2014 10:40 AM
    Hey David it's Justin Metts. I'm in WV on a ice storm now but I'm interested in a tool box rod rack. Also I don't know if Kevin Shull got in touch with you but he needed some welding done on his boat. Thanks Justin.
  10. 03-01-2014 11:33 AM
    Wondering if you can fabricate a cluster (5 Rod) rod holder for my boat. It would need to fit into a gunnel mounted offset holder and be able able to accommodate at least 4 50 wides. Look forward to your response.

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.