marolina marolina is offline

Admirals Club

Visitor Messages

Showing Visitor Messages 1 to 7 of 7
  1. marolina
    05-31-2018 06:59 AM
    Thank you I will send picture,,, I respect your knowledge and you may not know it but you taught me the proper way to spray PVA many years ago.. I never forget those who help me and have helped me along,, I hope to be able to help others

    I use Brokensheer on the boat design forum
  2. tunnles
    05-29-2018 03:28 PM
    making boats longer ,wider ,different shapes and modifying not to much of a problem !The hardest part is making the first cut !!
    Added 1.5 meter to a short fat boat that was completely out of proportion and made the boat handle and run completely different and the owner was amazed at the difference !
    Any things is possible just the planning of how to add , how to build , and how to extend the internal framing !
    So fire away, pictures of the existing boat and a clear idea od what you want and where you want to add to and how much !!
    This is my email address so lets deal direct if that's ok with you !!

  3. Ktscottjr
    04-19-2017 08:47 PM
    are you still making the hatch gutter drains. Rebuilding a 1975 221B mako and after 6 hrs of research I am praying you are the angel im looking for
  4. daveschw
    07-11-2015 12:16 PM
    Bo, sent u a message from my cell phone re: the rails.
  5. daveschw
    04-26-2015 09:10 AM
    Hi Bo, are you still making deck hatches?
    I need some different sizes for my boat project.
    Can you list the sizes you have available and prices?
    Tried to send you a pm, but your mailbox is full.
    Thanks, Dave.
  6. Badabing23
    03-30-2014 04:57 AM
    Let me know if you have any questions about Competition
  7. GCC
    06-28-2010 06:18 PM
    Thanks for the tip brother, but I got the scribing figured out. Its just one of those things that you really need to see done before trying to do it, but at the same time its also like riding a bike, once you learn its a piece of cake. Im sure your method would work but the Meranti ply is too expensive to be losing 4 inches at each seam. With scribing, you only scribe one piece at each seam and its usually about 1/4 to 3/8 of an inch.....

About Me

  • About marolina
    A long list
    Southern Maryland
    fishing , hunting Outdoors,
    Boat builder composite fabricator


Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 08:19 AM
  • Join Date: 09-30-2009
  • Referrals: 1


Showing Friends 1 to 1 of 1