Notices
Like Tree1Likes
  • 1 Post By Castrohasanafro

Linking fusion radio to garmin

Old 02-06-2019, 06:46 PM
  #1  
Admirals Club Admiral's Club Member
Thread Starter
 
Join Date: Jan 2018
Posts: 245
Default Linking fusion radio to garmin

Fusion M6-UD650 the Garmin is an 8610xsv...
TopOrStop is offline  
Old 02-06-2019, 06:56 PM
  #2  
Admirals Club Admiral's Club Member
 
Join Date: Jan 2014
Location: Miami FL
Posts: 3,032
Default

Assuming its a question on how to, Nmea 2000 network them.
TopOrStop likes this.
Castrohasanafro is offline  
Old 02-06-2019, 08:39 PM
  #3  
Senior MemberCaptains Club Member
 
Join Date: Jul 2008
Location: Bahrain/Houma,LA
Posts: 221
Default

Looking at the manual and online pictures, this unit particular unit has a standard nmea2k connector on the back. You will simply add a cable from there to your existing nmea2k network. Most likely you will need to add a tee. If you have no existing nmea2k network, you will need to create one. The are numerous nmea2k starter kits available. You would need a network power cable, a terminator for each end, and 1 tee. The Garmin should have come with a drop cable and one tee. The tees will be connected together. One drop on the 1st teel will be for the nmea power cable, the 2nd tee will be used with the drop cable and run to the radio, and then a terminator on the end of the tees. The Garmin manual and the Fusion manual both show the basic network diagram.
getusummm is offline  
Old 02-07-2019, 02:17 PM
  #4  
Senior MemberCaptains Club Member
 
Join Date: Jan 2005
Location:
Posts: 3,396
Default

Here is a link to the NMEA2K solution in the 650 manual

https://www.garmin.sk/img.asp?attid=69120

Jim
jfwireless is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread