Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Adding a second station switch to an older Lenco system

Notices

Adding a second station switch to an older Lenco system

Old 11-28-2018, 02:35 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Mar 2006
Location: Tampa
Posts: 1,864
Default Adding a second station switch to an older Lenco system

Starting to put together a parts list of what I will need to rig a second station on my boat. I'm currently running an older set of standard lenco 9x12's unsure of the exact part number but they're about ten years old with the standard switch and separate brain. I've been told the new switches have the brain in the switch and parts between the new and old may not all work together. What I want to know is that if anyone knows what I will need to add an additional switch for an additional station. I'm hoping I can retrofit my existing system or someone knows where I can get the additional parts I need. Thank you for any insight on the subject.
Patton222 is offline  
Old 11-28-2018, 05:09 PM
  #2  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Mar 2006
Location: Tampa
Posts: 1,864
Default

Disregard. Had a few minutes for additional searching and found what I needed. For anyone in the same figurative boat look into lenco flybridge kits.
Patton222 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread