Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Simrad GO9 with gateway for Verado Engine Data

Notices

Simrad GO9 with gateway for Verado Engine Data

Old 07-04-2018, 06:37 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jun 2018
Posts: 3
Default Simrad GO9 with gateway for Verado Engine Data

Hey guys,

Is anyone running twin Verado's with the gateway unit for NK2? Just hooked up a Simard GO9 with gateway to twin Verado's. Trying to figure out how to get a engine data layout to support twin engines. Seems that all the factory "layouts" for gauges on the Simard are only setup for 1 engine. Even with changing what displays on each gauge it just doesn't flow right to support a side by side engine data display for twin engines. What have someone of you done with a similar setup? *Note, I have re-done my helm to eliminate all normal gauges. Now running 2 12" simrads and then the GO9 as a projected vessel view. Clean and simple. THANKS!
Cashnoutsportfishing is offline  
Old 07-04-2018, 08:33 AM
  #2  
Senior Member
 
Join Date: Mar 2016
Location: orange beach al
Posts: 672
Default

not sure what you are saying or asking, I use the go 7 with VesselView link for 3 verados
moneyeater is offline  
Old 07-04-2018, 09:16 AM
  #3  
Senior Member
 
Join Date: Jun 2011
Location: Charleston, SC
Posts: 354
Default

It will not show multiple gauges per engines.
It will show different color needles for each engines on a single gauge, red, green and blue if you have triple for center engines.
MikeBador is offline  
Old 07-04-2018, 11:00 AM
  #4  
Senior Member
 
Join Date: Mar 2016
Location: orange beach al
Posts: 672
Default

Have you gone in the setting for the VesselView on the simrad ( not setting for the simrad itself) and see if you can change the gauge screen. Sorry but I don’t know anything about VesselView gateway
moneyeater is offline  
Old 07-04-2018, 11:34 AM
  #5  
Senior Member
 
Join Date: May 2007
Location: The Netherlands
Posts: 1,021
Default



Originally Posted by Cashnoutsportfishing View Post
Hey guys,

Is anyone running twin Verado's with the gateway unit for NK2? Just hooked up a Simard GO9 with gateway to twin Verado's. Trying to figure out how to get a engine data layout to support twin engines. Seems that all the factory "layouts" for gauges on the Simard are only setup for 1 engine. Even with changing what displays on each gauge it just doesn't flow right to support a side by side engine data display for twin engines. What have someone of you done with a similar setup? *Note, I have re-done my helm to eliminate all normal gauges. Now running 2 12" simrads and then the GO9 as a projected vessel view. Clean and simple. THANKS!
Nope, not yet but planning it in the coming months, waiting for a link multi now for several weeks. Can you share intell and pictures when it works?

Last edited by keizerh; 07-04-2018 at 11:49 AM.
keizerh is offline  
Old 07-04-2018, 11:52 AM
  #6  
Senior Member
 
Join Date: May 2007
Location: The Netherlands
Posts: 1,021
Default

I guess you have a vessel view link for the single engine, not the multi
keizerh is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread