Notices
Marine Electronics Forum

Sonar Help

Old 11-29-2017, 01:05 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2017
Location: Fort Myers, Florida
Posts: 22
Default Sonar Help

I recently purchased a boat wit a Airmar B744V thru hull transducer. It was originally connected to a Raymarine E-series system. I am looking for a new chart plotter / fish finder combo that would work with this transducer. Any help is appreciated.


Thanks.
JWallace is offline  
Old 11-29-2017, 01:38 PM
  #2  
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
 
Join Date: Oct 2009
Posts: 22,043
Default

You can use that with many Navaco, Garmin and Furuno units...but that would require pigtails with the Navico & Furuno... and the 8 pin wire block adapter for a Garmin.
Navico 7 pin blue pig tail: 000-10046-001
Furuno pig tail: Air-033-333
Garmin 8 pin wire block: 010-11613-00

What size screen are you needing ?



.

Last edited by semperfifishing; 11-29-2017 at 03:11 PM.
semperfifishing is offline  
Old 11-29-2017, 01:41 PM
  #3  
Senior Member
 
Join Date: Jan 2012
Posts: 1,741
Default

You can also use it with many new models of Raymarine units. eSx7, Axiom RV, and Axiom Pro. They make adapters so no cutting or splicing is required.

Really, there are not a lot of models that wont work with that transducer from the big four brands.
Amity83 is offline  
Old 11-29-2017, 03:03 PM
  #4  
Senior Member
 
Join Date: Mar 2016
Location: orange beach al
Posts: 675
Default

you can contact gemeco ( nice people and quick responds) and they can tell you what works with what or what adapter you might need, they do not sell it but will tell you where to get it, semperfifishing can probably get it for you
moneyeater is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread