Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Furuno 165T-B54 Thru-Hull Transducer for 200/50 kHz?

Notices
Marine Electronics Forum

Furuno 165T-B54 Thru-Hull Transducer for 200/50 kHz?

Old 11-20-2017, 10:41 AM
  #1  
Admirals Club Admiral's Club Member
Thread Starter
 
Join Date: Jan 2008
Location: Cedar Key, FL
Posts: 788
Default Furuno 165T-B54 Thru-Hull Transducer for 200/50 kHz?

Can you use a Furuno 165T-B54 Thru-Hull Multibeam Transducer for 50/200 kHz 2D sonar frequencies with a TZ touch 2 unit and then add the 3D black box at a later date?
m9000 is offline  
Old 11-20-2017, 11:04 AM
  #2  
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
 
Join Date: Oct 2009
Posts: 22,030
Default

Furuno DFF3D FAQ'S

FAQ for the DFF3D.....

From what I have seen to date the 165-T-B54 can only be used with the DFF3D module...and it has a freq of 165 kHz....and cannot be used at 50/200 kHz.


.
semperfifishing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread