Notices
Marine Electronics Forum

B260 transeducer on small fishing boat

Old 09-10-2014, 10:56 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Aug 2014
Posts: 10
Default B260 transeducer on small fishing boat

Can I use B260 transducer If my boat is 6.8 meters. I have seen in the manual that boat size should be over 9 meters.

And how do you guys install a transducer like that? My hull-deadrise is about 30 degrees. 20 degree is max.
morphs is offline  
Old 09-10-2014, 11:09 AM
  #2  
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
 
Join Date: Oct 2009
Posts: 21,959
Default

The reason they show 9 meters is that the B260 has a 22" fairing..and on smaller boat it could adversely affect handling etc.

You can pocket mount the B260 element and thus avoid the fairing.
Of you can use the SS264N pair ..those are flush mounted.
Or use the Tm260 transom mount.
semperfifishing is offline  
Old 09-10-2014, 11:41 AM
  #3  
Junior Member
Thread Starter
 
Join Date: Aug 2014
Posts: 10
Default

I have an inboard engine so I can not use the transom mount then?


pocket mount the B260 element sounds like a goog idea. Do you have some tips/sketch on how to do that?

And you are sure i dont need high speed faring to get a good result?
morphs is offline  
Old 09-10-2014, 02:45 PM
  #4  
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
 
Join Date: Oct 2009
Posts: 21,959
Default

Originally Posted by morphs View Post
I have an inboard engine so I can not use the transom mount then?


pocket mount the B260 element sounds like a goog idea. Do you have some tips/sketch on how to do that?

And you are sure i dont need high speed faring to get a good result?


Yes, I can help you with how to pocket mount...will send a PM.
As to the fairing...how deep are your targets going to be ?
semperfifishing is offline  
Old 09-11-2014, 10:23 AM
  #5  
Junior Member
Thread Starter
 
Join Date: Aug 2014
Posts: 10
Default

Can I make a box in fiberglass and place transducer and fairing on this?

I was thinking to make rounded edges in front and back of the box

And bottom of the box will be parallell with bottom
morphs is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread