Notices

Bsm-3

Old 09-04-2014, 11:35 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Feb 2004
Posts: 924
Default Bsm-3

Have just received the Bsm-3 to hook up to my TM-265 H/L Ducer and NSS-12
I notice that their are no impedence jumper wires and also their are no bare as in earth wires connected to the internals high / low xducer plugs that come from the new external screw plugs
Am I also able to purchase the female plugs to fit to my tm 265 ducer cable so I can use the new external plugs if so where can I purchase them from
Thanks in advance
ozmako is offline  
Old 09-05-2014, 07:49 PM
  #2  
Senior Member
Thread Starter
 
Join Date: Feb 2004
Posts: 924
Default

It is interesting to note that the new BSM-3 wiring diagram in the installation manual says it is for the 265 series xd
ozmako is offline  
Old 09-05-2014, 09:14 PM
  #3  
Admirals Club Admiral's Club Member
 
Join Date: Aug 2009
Posts: 11,657
Default

What's series xd?
VanW is offline  
Old 09-06-2014, 10:22 PM
  #4  
Senior Member
Thread Starter
 
Join Date: Feb 2004
Posts: 924
Default

265 series I am assuming all 265 xd have the same wiring details
Has anyone with any further experience with the BSM-3 over the BSM-2 Or any operational suggestions
Thanks in advance
ozmako is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread