Notices

Simrad Nss7 evo2?

Old 09-02-2014, 04:58 PM
  #1  
Admirals Club Admiral's Club Member
Thread Starter
 
Join Date: Aug 2009
Posts: 11,652
Default Simrad Nss7 evo2?

Is it compatible with the bsm3? If it is, then it seems like it would be better than the Garmin units that aren't upgradable to the gsd26? Or is that power just not needed with chirp?
VanW is offline  
Old 09-02-2014, 05:14 PM
  #2  
Senior Member
 
Join Date: Feb 2005
Location: Norway
Posts: 14,043
Default

Yes, NSS7 Evo2 is compatible with BSM-3. The built in 1-channel CHIRP sounder in NSS Evo2 is very good, but of course good to know that the system can be expanded with a two channel CHIRP sounder later if needed.
abbor is offline  
Old 09-02-2014, 05:16 PM
  #3  
Admirals Club Admiral's Club Member
Thread Starter
 
Join Date: Aug 2009
Posts: 11,652
Default

Thank you. Not possible to run structure scan and chirp at the same time though correct?
VanW is offline  
Old 09-02-2014, 05:25 PM
  #4  
Senior Member
 
Join Date: Feb 2005
Location: Norway
Posts: 14,043
Default

Correct, but not a big problem. NSS Evo2 (as all Lowrance and Simrad sounders) is using very short pulses at the depths where StructureScan brings value so the reduction in resolution at these depths due to running fixed frequencies are inegligible.
abbor is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread