Notices

Simrad autopilot help

Old 08-31-2014, 02:11 AM
  #1  
Member
Thread Starter
 
Join Date: Aug 2012
Posts: 67
Default Simrad autopilot help

Goodmorning to everyone from germany
I have a simrad nss7 on my boat and i wanted to install the ap24 autopilot.
I have hydraulic steering system installed.
Can anyone tell me which components do i need for the autopilot except the ap24 unit?
aggeloseco is offline  
Old 08-31-2014, 04:02 AM
  #2  
Senior Member
 
Join Date: Feb 2005
Location: Norway
Posts: 14,021
Default

Actually AP24 is the only thing you don't necessarily need. AP24 is the control panel, the autopilot can be operated and commissioned from NSS7.

You need:
RC42N compass
AC12N autopilot computer
RPU80 pump
NMEA 2000 starter kit

All the above is available as a kit from some dealers (BOE Marine is one)

In case you buy from an European dealer make sure you get the N versions of the compass and the computer. If they don't find them listed in the Simrad catalogue, they are listed in the B&G catalogue (as the Triton pilot)

If you have first generation NSS I would recommend the small OP10 control panel, OP comes very handy with NSS Evo2 as well.

In addition you need two T-pieces, two short hydraulic hoses and probably some adapters as well.
abbor is offline  
Old 08-31-2014, 05:47 AM
  #3  
Member
Thread Starter
 
Join Date: Aug 2012
Posts: 67
Default

Abbor thank you very much for your help
aggeloseco is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread