Notices
Marine Electronics Forum

Garmin 4208 wont upoad g2Vision

Old 06-30-2014, 04:34 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 21
Default Garmin 4208 wont upoad g2Vision

Updated the software in the 4208 to Version 7.7 and all is good. Insert the micro SD card (Garmin g2 Vision VUSO1OR into the unit and the screen changes to recognize the inserted card showing the correct name of the chart,etc. Toggle menu choices to "manage card" and then hit either "Replace from card" or "merge from card" and the screen changes to a blank screen that says "File Name" and no file name is shown . It apprears I should be able to page up or down here to click on the file name and the upload would start. Nothing there and nothing happens. After 10 seconds or so it resets itself to the Garmin opening screen shot when you initially turn it on.

What am I doing wrong and any tips much appreciated!
Mike
catarocket is offline  
Old 06-30-2014, 06:21 AM
  #2  
Senior Member
 
Join Date: May 2011
Location: Forked River, NJ
Posts: 155
Default

The g2 vision data is usually read directly from the card, and displayed on the chart plotter. They are not uploaded to the chart plotters memory.
rigginitright is offline  
Old 07-01-2014, 05:20 AM
  #3  
Junior Member
Thread Starter
 
Join Date: Oct 2010
Posts: 21
Default

That makes sense but they just don't tell you that from Garmin in any of the literature,manuals,etc. Wish I had know whould have saved a few beers.....ok it wasn't all that bad!
Mike
catarocket is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread