furuno 1650 question

Old 08-01-2013, 04:40 PM
Thread Starter
Join Date: Apr 2013
Posts: 49
Default furuno 1650 question

I recently bought a boat.,with a furuno 1650d in it. When i power it up it comes up with the correct lat.& long. But detail on the screen unless you go to the 1000 or the 2000 mile scale then it shows the east coast. What's up? Has someone removed data from memory? The test mode when you power up says ok.
davidcarr999 is offline  
Old 08-01-2013, 05:41 PM
Admirals Club Admiral's Club Member
THT sponsor
Join Date: Jul 2010
Posts: 4,759

It needs a chart card, either navionics classic navchart unless it specifically says "cmap" on the chart door, in which case it uses C-Map NT+ FP cards
mstyle8517 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread