Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Can NavNet3D and lowrance LGC3000 be used together?

Notices

Can NavNet3D and lowrance LGC3000 be used together?

Old 07-29-2013, 01:49 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2010
Posts: 29
Default Can NavNet3D and lowrance LGC3000 be used together?

Hey everyone after some advice, I have just sold my HDS unit and brought a Furuno MFD12 my current set-up included a NMEA2K that was running my LGC3000 antenna and a Lowrance EP80R temp sensor might be a silly question but could I use the lowrance temp sensor and gps receiver with the MFD or will I need to sell them and get Furuno gear?
Cheers Willie
willie125 is offline  
Old 07-29-2013, 05:21 AM
  #2  
Senior Member
 
Join Date: Jul 2007
Location: Melbourne, Australia
Posts: 471
Default

LGC3000 should be fine. I have a Lowrance EP80R and it is a major disappointment. It outputs proprietary Lowrance messages (PRNs) that are not understood by my Furuno MDF8 and Simrad AP24 Autopilot.
gdfisher is offline  
Old 07-30-2013, 12:28 AM
  #3  
Junior Member
Thread Starter
 
Join Date: Nov 2010
Posts: 29
Default

Originally Posted by gdfisher View Post
LGC3000 should be fine. I have a Lowrance EP80R and it is a major disappointment. It outputs proprietary Lowrance messages (PRNs) that are not understood by my Furuno MDF8 and Simrad AP24 Autopilot.
Thanks for the reply, I can survive buying another temp sensor for furuno will be good not having to splash out on a furuno antenna. thanks for that.
willie125 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread