Notices

Bennett trim tab controllers

Old 05-18-2013, 03:09 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Apr 2013
Posts: 5
Default Bennett trim tab controllers

I have the old single lever trim tab controller has anyone replaced one of those with a double rocker switch or the auto tab controller? what your opinion/advice? I need to replace mine.
stormydog is offline  
Old 05-18-2013, 06:12 PM
  #2  
Senior Member
 
Join Date: Jul 2010
Location: Hudson Valley,NY
Posts: 590
Default

give a shout out to Tom from Bennett marine aka TABMAN, he will answer your question.
BoatlessInNY is offline  
Old 05-19-2013, 03:52 AM
  #3  
Senior MemberVendorCaptains Club Member
 
Join Date: Apr 2001
Location: The Tab Cave
Posts: 7,939
Default

Matt,


The ES2000 Rocker Switch will replace your old Single Lever Control. It comes with 4 ring terminals for the Blue, Yellow, Red and Green wire. You can cut the old spade terminals off those wires and crimp the ring terminals on to the wires and connect them to the new switch. It also comes with a new orange power lead and 20 amp fuse you can run to where the old control got its power.


The Auto Tab Control is a nice addition and can be added at any time, take a look here for more info including a link to the installation instructions http://www.bennetttrimtabs.com/catal...?vID=167&cID=4


But the Auto Tab Control does not replace the Rocker Switch, you would still need to install one. It's kind of like still needing your gas pedal when you have cruise control in your car. There are times when you will want / need to control them manually.


Let me know what you think.


Tom
Tabman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread