Notices

Icom, GP 360ML...

Old 03-05-2013, 08:19 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Aug 2009
Location: OCMD
Posts: 368
Default Icom, GP 360ML...

If anyone owns this unit and can provide some suggestions I will be most gratefull. When I turn my unit on it goes to plot mode and displays a chart of Baltimore where I used to have a slip. I now have a slip in Ocean City, Md. What can I do to make it display the chart of the Ocean City area instead of Baltimore when I turn the unit on? There is no waypoint listed for the Balt. slip that I could just delete, but yet my waypoint list shows 50 waypoints but the unit says that I have 51 waypoints used. Please help.
Thank you, Bob
Soots is offline  
Old 03-07-2013, 08:40 AM
  #2  
Senior Member
 
Join Date: Jun 2005
Location: OBX
Posts: 222
Default

Are you using a navionics chart card or base map?
ChaserB31 is offline  
Old 03-07-2013, 03:03 PM
  #3  
Senior Member
Thread Starter
 
Join Date: Aug 2009
Location: OCMD
Posts: 368
Default

I have a "Nav. chart card" in the machine showing the OC area and ocean. I pulled the "card" out that did show the Baltimore area and bay. When I hit the plot button it goes to Balt. on the programed chart. I then scroll across the bay to OC and it shows the depths, etc from the Nav. chart. It should go to OC from the onset not to the Balt. area where it shows the boat icon in what was my old slip.

Thanks for any advice you can give, Bob
Soots is offline  
Old 03-07-2013, 03:30 PM
  #4  
Senior Member
 
Join Date: Oct 2002
Location: South of the North Pole
Posts: 695
Default

Item 1.11 in the manual says simply press the "save" key when you turn it on. That becomes the first waypoint.

I had a gp360 so I have the manual on my pc, don;t have the gp360 anymore, so I can't test this for you.
waybomb is offline  
Old 03-08-2013, 05:07 AM
  #5  
Senior Member
Thread Starter
 
Join Date: Aug 2009
Location: OCMD
Posts: 368
Default

Waybomb, Thank you so much! I have been struggling with this and could not figure it out. That's what these fishing boards are all about- Helping one another! Thank you again, Bob
Soots is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread