Notices

Help Needed : Raymarine AP issues

Old 07-14-2012, 09:53 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2010
Location: Panama City, Florida
Posts: 1,022
Default Help Needed : Raymarine AP issues

I really need some help with my Raymarine Autopilot. Here is my current set up.

I have a Smart Pilot Module, which is connected to a Fluxgate compass and hydraulic pump motor. From the Smart Pilot Module, I have a 3 wire seatalk cable ran to the ST8001 AP controller flush mounted. From there, it is wired to the Master of my C-120 pair.

My problem is that sometimes the heading given from the AP is in agreement with the magnetic compass on the dash. Then just randomly out of the blue, it decided to do a 180. Thus making the AP compass and the Magnetic compass not agree,

I have read that there has been similar problems with these before, doing similar problems. I saw posted earlier that it might be a capacitor that has been soldered in reverse.

Anybody have any advice? I would greatly appreciate it.
Wraypau is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread