VHF install in E-Box

Old 07-12-2012, 07:22 PM
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Tierra Verde, FL
Posts: 308
Default VHF install in E-Box

I will be installing a VHF radio in the electronics box. Instead of drilling holes in the top of the e-box, would 5200 hold the mounting bracket to the top of the e-box?
Grey_Beard is online now  
Old 07-13-2012, 04:52 AM
Senior Member
Join Date: Jan 2011
Location: englewood, florida
Posts: 5,263

i have experience with standard silicone doing it and making removal a bit easier than 5200 would of my boats had all the electronics mounted with silicone when i bought it...when i stripped them off the helm and hardtop were still like brand new...and they were on there pretty damned good...
bladenbullet is offline  
Old 07-13-2012, 05:45 AM
Senior MemberCaptains Club MemberPLEDGER
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 8,140

Don't use 5200. If you ever decide to remove it, you will have a mess on your hands.

When I owned my GW 226, I installed a stereo enclosure, XM dock, and VHF, all with the 3M double sided "outdoor" tape - available at Home Depot. It held just fine no matter how rough the conditions were. This was the finished product:

S3500002 by parthery, on Flickr
Parthery is offline  
Old 07-13-2012, 01:46 PM
Admirals Club Admiral's Club Member
Join Date: Apr 2005
Location: AL
Posts: 4,273

get some 4200 (or bondo) and a piece of pvc board from lowes or home depot and stick the pvc board where you want it (using the 4200), then mount the vhf on top of it like it is supposed to, then when you have to get a new one or upgrade you will be ready to go.
mwgoldman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread