The Hull Truth - Boating and Fishing Forum

The Hull Truth - Boating and Fishing Forum (https://www.thehulltruth.com/index.php)
-   Marine Electronics Forum (https://www.thehulltruth.com/marine-electronics-forum-19/)
-   -   Raymarine C-120 Flush Mount Kit (https://www.thehulltruth.com/marine-electronics-forum/406611-raymarine-c-120-flush-mount-kit.html)

The Business 02-22-2012 08:54 AM

Raymarine C-120 Flush Mount Kit
 
Does anyone know where I can order a flush mount kit for a c-120. Raymarine is not caring them anymore and the bracket has broken in the corners both times I have had to uninstall the unit.

tpp517 02-22-2012 12:33 PM

No such thing as a flush mount kit. Remove the front bezel and you will find a mounting hole in each corner of the MFD. Once you cut the hole for the display to fit mark the mounting holes and bolt it in place.

The Business 02-22-2012 01:42 PM

I may end up doing that, but there is flush mount kit. It's a plastic rectangle that you bolt into the corners. I've gone thru 2 in the last couple of months. Probably just easier to do it the way you suggest.

paraman 02-22-2012 03:07 PM

flush mounting kit
 
1 Attachment(s)

Originally Posted by tpp517 (Post 4388081)
No such thing as a flush mount kit. Remove the front bezel and you will find a mounting hole in each corner of the MFD. Once you cut the hole for the display to fit mark the mounting holes and bolt it in place.

FYI for the early C120 and E120 this is what was included in the box to surface/flush mount the unit to the console.
see pic
just use stainless locknut's Teflon/rubber washer and stainless washers to bolt the MFD to the console. Don't over tighten.
paraman


All times are GMT -7. The time now is 05:12 PM.

Powered by vBulletin® Version 3.9.3.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.