Garmin NMEA2000 and Yamaha command Link

Old 02-17-2012, 06:42 AM
Admirals Club Admiral's Club Member
Thread Starter
Join Date: Aug 2011
Posts: 332
Default Garmin NMEA2000 and Yamaha command Link

I am installing a Garmin 740 S and have a Yamaha F250 with Command link gauges, (Tach, and Speed/Fuel). I intend to run a Mare-002 cable from the Garmin to the Command Link busbar to enable viewing of engine data on the Garmin. My question is whether the Yamaha Speed/ Fuel gauge will pick up the signal from that link to read speed and MPG or must the NMEA183 wires from the Garmin also be hooked to the NMEA183 wires coming from the Speed/Fuel gauge?
cquester5 is offline  
Old 02-17-2012, 07:15 AM
THT Sponsor
THT sponsor
Join Date: Jan 2002
Posts: 17,508

You do not need to connect the 0183. N2K will handle it. The MARE-002 is the right cable.
yachtjim is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread