Marine Electronics Forum

Garmin HD 24 Radar 4210 Chartplotter

Old 02-12-2012, 04:20 PM
Junior Member
Thread Starter
Join Date: Feb 2010
Posts: 19
Angry Garmin HD 24 Radar 4210 Chartplotter

My system bought new May 27, 2011 - worked fine until this weekend - The 4210 chartplotter does not "recognize" the HD24 Radar - sonar, xm-sat and gps all work fine(nema 2X and marine network). I have put in a new Ethernet cable, updated software to vers 7.1 and changed out the marine network plug location per Garmin's instructions - but it still does not work - warranty is good - has anyone else had similiar problems
cappeter is offline  
Old 02-12-2012, 05:05 PM
Admirals Club Admiral's Club Member
Join Date: Sep 2011
Location: Clayton/NC Coast
Posts: 2,942

Did you check to make sure you still have power to the 24HD? Can you hear the radar spinning up? I could always hear mine at startup. That is where I would start.
budbrande is offline  
Old 02-12-2012, 05:38 PM
Junior Member
Thread Starter
Join Date: Feb 2010
Posts: 19

Yes I checked to power to the HD24 = 13.1v - thanks for asking
cappeter is offline  
Old 02-12-2012, 07:43 PM
Senior MemberCaptains Club MemberPLEDGER
Join Date: Oct 2002
Location: mass/Point Judith, RI dockage
Posts: 11,842

Check for errors in the logs then call garmin. You've done all the ez stuff.
gerg is offline  
Old 02-14-2012, 10:43 AM
Senior MemberCaptains Club Member
Join Date: Feb 2005
Location: Falmouth, MA
Posts: 5,715

sounds familiar, i used to have issues like this with my garmin radars all of the time. i finally found the a different brand! sorry i can't be more helpful. but...the garmin service dept is good and will stick with you 'til it's fixed. i just got tired of sending stuff back & forth to them.
chainsaw42 is online now  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread