Notices
Marine Electronics Forum

I need help with airmar ducer specs

Old 10-25-2011, 04:48 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Jan 2011
Location: Loxahatchee, Fl
Posts: 452
Default I need help with airmar ducer specs

Went to the airmar site, no help. I have an airmar ducer installed in a new to me boat that is labeled:
06-0599 50/200 kHz
CA50/200 BTD
31-109-2-01

Anyone have a way of finding the specs and does anyone produce a pigtail that would allow me to use this with a SH CP500 and FF525 black box? I know it's a long shot, but it is a beautiful installation with a fairing block. I would hate to cut it out if there is any chance it could be saved.

Thanks in advance,
Bob
King Killer is offline  
Old 10-25-2011, 08:29 PM
  #2  
Senior Member
 
Join Date: Aug 2011
Location: Gulf side of Florida
Posts: 182
Default

Furuno. Check this site, way down on the first page:

http://www.marinedeal.com/category_s/3593.htm

Good Luck.
Seagrass is offline  
Old 10-26-2011, 08:23 AM
  #3  
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
 
Join Date: Oct 2009
Posts: 22,025
Default

No pigtail available but you can rewire a SH plug.

The connector you are now using is a Furuno 10-pin but all you going to need to use is three or 4 wires.
semperfifishing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread