Marine Electronics Forum

Problem with Fusion Radio and IOS5

Old 10-24-2011, 06:59 AM
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 229
Default Problem with Fusion Radio and IOS5

I have the fusion MS-RA200 and the ipod dock. I recently upgraded my Iphone 4 to the new IOS5 operating system. Prior to the upgrade everything worked fine. Now I get the error message, "No Ipod Detected." Has anyone else had this problem? I have contected fusion through email but have yet to hear back.
njcoons is offline  
Old 10-24-2011, 08:29 AM
Senior Member
Join Date: Aug 2010
Posts: 871

You will most likely need to update the firmware on the MS-RA200 in order to support the new iPhone OS. If available, the update will need to be installed from a flash drive on the MS-RA200 USB port. Wait for Fusion to respond.
the_gooch is online now  
Old 10-25-2011, 04:13 PM
Junior Member
Join Date: Oct 2011
Posts: 1

The MS-RA200 will require a software update to the current version if you do not have ver 10.2330 installed. This can be emailed to you by requesting it via this link
it is simple to install via a USB key formatted to FAT32 and enables compatibility with IOS5.
Lancerchalmers is offline  
Old 10-26-2011, 08:01 AM
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 229
Default It worked, thanks

Fusion emailed me the update file and directions. Works great now.
njcoons is offline  
Old 10-26-2011, 12:37 PM
Admirals Club Admiral's Club Member
THT sponsor
Join Date: Sep 2009
Location: Boynton Beach, Fl
Posts: 1,225

Is this update required for the MS-IP600?
CalicoJack is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread