Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Need help on replaceing Raymarine electronics


Need help on replaceing Raymarine electronics

Old 10-11-2011, 12:18 PM
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Live in Central Oklahoma and do 16 to 30 offshore trips each summer on my boat
Posts: 155
Default Need help on replaceing Raymarine electronics

I used a pair of Raymarine C120's, (1 for Nav and 1 for sounder)flush mounted in the console of my 2007 Sailfish. The auto pilot and sounder are also Raymarine. I would prefer to replace the C120's with Raymarine electronics that will fit the same holes in the console. I will also have to replace the cables to the sounder , antenna and the auto pilot. I am looking for suggestions. I need to replace the cables because the midnight uninstaller at the marina was in a hurry to remove the equipment and used side cutters to remove the cables. Any input will be appreciated.
Thanks for reading
Ken S
KSVILLE is offline  
Old 10-11-2011, 12:22 PM
Senior Member
Join Date: Sep 2011
Posts: 299

Did you have the serial numbers loged in with raymarine?
Stillherejim is offline  
Old 10-11-2011, 12:31 PM
Senior Member
Join Date: Feb 2005
Location: Norway
Posts: 14,043

Raymarine has gone for the widescreen format, none of the new units will fit directly to your console. But you have an excellent alternative, Simrad NSE12. NSE12 will fit the holes in your panel, you may have to do some minor adjustments in the corners, but that's all. NSE is a better MFD than anything currently offered by Raymarine.
abbor is online now  
Old 10-11-2011, 01:54 PM
Admirals Club Admiral's Club Member
THT sponsor
Marine Advertiser
Join Date: Oct 2009
Posts: 21,749

Pm sent
semperfifishing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread