Notices
Marine Electronics Forum

lowrance vs flowscan

Old 09-12-2011, 10:51 AM
  #1  
Admirals Club Admiral's Club Member
Thread Starter
 
Join Date: Aug 2011
Posts: 442
Default lowrance vs flowscan

Fellow members:

I recently sold my old amberjack255 and removed the new hds-7 I installed in the spring. It is now happily installed in the Rampage. the new rampage has Flowsan 5500 series one guage with totalizer and GPH for one engine at a time that you toggle between.

As part of the istallation in the old boat I installed a thru hull transducer ( was not able to remove.) and the r60 fuel flow sensor which I have removed.

My question...Is it worth removing the flowscan and adding a second r60? I found it to be very accurate in its previous install. The price for the second sensor is about $85 bucks and would give me total per tank as now I get only total used and it would give me GPH on each engine at the same time avail as an overlay...plus season total..per engine and trip total per engine..

sounds like I answered my own question..

Opinions?

.anyone intrested in a flowscan with two sensors?

Thanks.
westiemax is offline  
Old 09-12-2011, 11:22 AM
  #2  
Senior Member
 
Join Date: Jul 2011
Location: S.FLA
Posts: 174
Default

How much for the flowscan with one sensor ?
Craft 305 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread