The Hull Truth - Boating and Fishing Forum

The Hull Truth - Boating and Fishing Forum (https://www.thehulltruth.com/index.php)
-   Marine Electronics Forum (https://www.thehulltruth.com/marine-electronics-forum-19/)
-   -   NMEA 2000 command link to Yamaha (https://www.thehulltruth.com/marine-electronics-forum/371535-nmea-2000-command-link-yamaha.html)

saltfever 08-17-2011 06:17 PM

NMEA 2000 command link to Yamaha
 
We have 2004 F-115 Yamahas and need to know if they are NMEA capable. Or is the only option we have for fuel usage is to splice the fuel line with the EP-60R sensor for each engine? We have the Lowrance HDS-10 unit.

SmokinBarrel 08-17-2011 08:54 PM

I have a 2009 Yam F150. I hooked up the Yam/Network connector (front of engine under cowling), and expected it to read or display fuel usage ect....

But, it didn't work. In a nutshell, I found out you have to have a inline EP-60R for it to work on the the dash engine readout within your HDS10. So, I purchased the fuel flow sensor EP-60R and installed after the water/Fuel separator and it works now.

onemilehigh 08-18-2011 06:18 AM

Don't think the 2004 would be NMEA capable. I believe it is the 2007 EFI 50 hp and up motors that are, so you would need the EP-60R.

If your engine is NMEA compliant, you do not need the EP-60R for fuel flow, it is part of the output from the engine. If you want to use the fuel usage on HDS, then you can purchase the EP-85R, which is a memory module that stores fuel usage information in the event the HDS is off.

saltfever 08-18-2011 02:16 PM

Thanks for the feed back.

polarred21 08-19-2011 04:10 AM

Worth a look....2006 and newer...

http://www.lowrance.com/en/Support/P...-to-NMEA-2000/


All times are GMT -7. The time now is 07:49 PM.

Powered by vBulletin® Version 3.9.3.8
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.