Notices

Trailer wiring

Old 08-07-2004, 07:50 PM
  #1  
Senior MemberCaptains Club Member PLEDGER
Thread Starter
 
Join Date: Sep 2002
Location: CAPE COD MA.
Posts: 529
Default Trailer wiring

I just replaced the 4 pin connectors on both trailer and truck, and all bulbs. I still have problems.
No right blinker on the trailer, when I brake the right tail light blinks. When I signal it goes out. It tests o.k. at the truck.
Bad ground on the trailer?
Thanks,
Tom
2ndCurse is offline  
Old 08-07-2004, 09:27 PM
  #2  
Senior MemberCaptains Club Member
 
Join Date: Jun 2002
Location: Pensacola, Fl.
Posts: 7,371
Default RE: Trailer wiring

QUOTE: Bad ground on the trailer?
Yep.
warthog5 is offline  
Old 08-08-2004, 03:18 AM
  #3  
Senior MemberCaptains Club Member
 
Join Date: May 2004
Location: Hawaii
Posts: 256
Default RE: Trailer wiring

Bad ground between the trailer lights and the trailer frame. Clean light mounting studs and trailer frame where stud mounts. Ensure bare shiny metal contact. Good luck .
lawaia is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread