Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Foruno 1622 Radar - Scanner Cable Connector

Notices

Foruno 1622 Radar - Scanner Cable Connector

Old 04-05-2003, 03:54 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: May 2002
Location: Jersey City, NJ, USA
Posts: 798
Default Foruno 1622 Radar - Scanner Cable Connector

Ok, I had to pull my radar cable to reroute some other wiring. The schematic in the installation manual has the pinouts for the 9-pin connector, but I'm not sure I'm reading it right. Can anyone confirm the following?

Pin Wire Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue? (from coax - video?)
7 Black? (from coax - ground?)
8 Gray
9 White

The blue and black from the coax are ones I'm not sure about. I assume black is ground, but the way the blue and black are shrinked wrapped to the end of the coax, it looks like blue is ground.

Yeah I know, I should have made a diagram before I pulled it part. Live and learn.
Ray KSUSA3 is offline  
Old 04-07-2003, 06:27 AM
  #2  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: May 2002
Location: Jersey City, NJ, USA
Posts: 798
Default Foruno 1622 Radar - Scanner Cable Connector

For the archives I confirmed the following from Furuno:

Pin / Wire Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue (coax braid)
7 Black (coax center)
8 Gray
9 White

Just in case I need to look it up again next year .
Ray KSUSA3 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread