Notices

RCL-75 spotlight install

Old 04-25-2003, 06:07 PM
  #1  
Member
Thread Starter
 
Join Date: Feb 2003
Location: Kendall Florida
Posts: 43
Default RCL-75 spotlight install

Hi folks,
I'm in the process of installing my new RCL-75 on my T-top.I need help with how to run the 7-wire cable. The connector at each end is flat and too wide to open holes in the T-top. Any suggestions?????
Mr Twister is offline  
Old 04-26-2003, 06:05 AM
  #2  
Senior MemberCaptains Club MemberPLEDGER
 
Join Date: May 2002
Location: Skaneateles, New York
Posts: 5,483
Default RCL-75 spotlight install

Mr Twister... Definately can't get it through, Right? Great light by the way. I have the ACR, RCL-100. What you will have to do is put a 'Independent Connector' in the console. See www.Bluesea.com Page 59 of catalog, Part #2408 for 15 AMPs, which I think is right Amps for your light, check it.. Cut the cable and run wire from light to connector. Run wire from control to connector. This will allow you to 'fish' wire to connector from both direction. This will minimize excess cable, too.

Boston Whaler, "MUMBLER", 24' Outrage, twin 175 HP Evinrude Ocean Pros. Snowball, the cat...
Mumblerone is offline  
Old 04-26-2003, 06:17 AM
  #3  
Member
Thread Starter
 
Join Date: Feb 2003
Location: Kendall Florida
Posts: 43
Default RCL-75 spotlight install

Mumblerone

Excellent idea! I’m on my way to West Marine. Thanks a bunch!
Mr Twister is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread