Notices
Marine Electronics Forum

Replacing transducer

Old 10-11-2008, 04:26 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: May 2007
Location: Central, New Jersey
Posts: 2,559
Default Replacing transducer

Hi all -

There is currently a L760 depth/gps unit on my boat. I am planning on changing to Garmin'2 4212 and will need to replace the transducer. The thru-hull design appears to be the same - do I need to change the block or is it easy to separate the bronze thru-hull from the old block and just install a new one?

Any tips on sealing it up for to prevent leaks etc?

Justin
Justin_NJ is offline  
Old 10-12-2008, 02:27 PM
  #2  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: May 2007
Location: Central, New Jersey
Posts: 2,559
Default RE: Replacing transducer

Also - what sealer should I use - Brand etc?
Justin_NJ is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread