Notices
Marine Electronics Forum

GPSmap 545s

Old 05-21-2008, 11:10 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2006
Location: Edgewood Md.
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
Default GPSmap 545s

What is required to configure AIS or DSC information on the GPSmap 545s?

Regards,
Old 05-21-2008, 03:20 PM
  #2  
Senior Member
 
Join Date: Mar 2006
Posts: 833
Likes: 0
Received 1 Like on 1 Post
Default Re: GPSmap 545s

You don't need anything per se. Just wire the AIS receiver's output to one of the 545s' inouts, then go to system configuration and set whichever port you chose for AIS.
Old 05-22-2008, 03:03 PM
  #3  
Senior MemberCaptains Club Member
 
Join Date: Mar 2007
Location: Annapolis
Posts: 1,929
Likes: 0
Received 0 Likes on 0 Posts
Default Re: GPSmap 545s

Since AIS talks at 38,400 baud and DSC talks at 4800 baud, they need to be wired to different com ports. Set the speeds on you communications tab. Some AIS units want to know where they are, and a lot of radios can tell your GPS where your buddies are. Two way communication to both is possible by connecting a few more wires. What brands and models do you have?

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.