Notices
Marine Electronics Forum

Furuno NavNet Radar question

Old 05-16-2008, 10:22 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Aug 2007
Location: Orange Beach, Al.
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Furuno NavNet Radar question

On my Navnet system for some reason the Radar display has done a 180 on me. It shows what is in front of me at the bottom of the screen. It was right until recently. How do I go about fixing it to where if what I am reading is in front of me it is on the top part of the display? Thanks for any help.
Old 05-16-2008, 07:59 PM
  #2  
Junior Member
 
Join Date: Jun 2007
Location:
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Furuno NavNet Radar question

Just hold down the menu key while powering the unit up to get into the installation mode, then when the radar screen comes up, press menu, system config, installation setup, radar set up. Make sure you have the correct antenna type selected, if you do, go to the next page, and select heading adjustment, turn the knob so the dotted line is 180 out then press set.
This happened to me awhile ago, so I emailed furuno.... I saved the email
Old 05-19-2008, 10:57 AM
  #3  
Junior Member
Thread Starter
 
Join Date: Aug 2007
Location: Orange Beach, Al.
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Furuno NavNet Radar question

Thanks for the help!

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.