Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

Notices

Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

Old 04-22-2003, 08:21 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Apr 2003
Location: Bayshore.NY USA
Posts: 8
Default Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

I have a 28' Pursuit, Denali. The dash meassures 10'H and 25'W. Did any one do this applacation on a 28' Denali dash? Thanks
vernon2 is offline  
Old 04-22-2003, 12:50 PM
  #2  
Senior MemberCaptains Club Member
 
Join Date: Sep 2002
Location: On the wild side !!
Posts: 5,700
Default Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

I would check the rough dimensions of the 2010 and see how close the fit is. The 2010 is shipped with a cutout template for flush mounting. You could countact Garmin custome service and see if they could mail /e-mail you a copy to check the fit before you purchase one.

It might be too close to tell unless you remove the dash panel and lay the template over it.

Before I mounted my 2006C, I photo copied the template in case I destroyed the original one.
BW23 is offline  
Old 04-22-2003, 07:28 PM
  #3  
Junior Member
 
Join Date: Apr 2003
Location: charleston sc
Posts: 22
Default Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

take a look at a west marine catalog, they usually have good dimensions of the units.
Schools Out is offline  
Old 04-23-2003, 01:39 PM
  #4  
Member
 
Join Date: Feb 2003
Location: Mullica Hill NJ
Posts: 42
Default Can I fit Garmin 2010 + 7" RayMarine Radar 28' Pursuit?

2010/c 13.1"Wx8.8"Hx3"deep
2060/c 10.25"Wx6.5Hx3.25"deep

2800cc Hydra-Sport Twin 250 HPDI Yamaha
TheDISTANCE is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread