Notices
Marine Electronics Forum

LMF-200 won't talk to C70

Old 08-13-2007, 05:25 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Sep 2005
Location: Northeast
Posts: 197
Default LMF-200 won't talk to C70

I spliced together the cables I need to connect my LMF-200 to my Rarmarine C70 via Seatalk2. Now, when I power up, I get a flashing position and NO FIX message on the LMF, and no fuel information on the C70. The initial position is accurate on the LMF, but never updates after that. I also get a groundspeed on the LMF, so there is some communication going on. I thought at first that I had a bad connection in the splice, so I took it apart and started again with heat shrink butt splice connectors, so I am sure the cable is good.

I successfully installed the latest C70 update a couple of weeks ago, so I am at a loss as to what to check next.
msand is offline  
Old 09-19-2007, 11:08 PM
  #2  
Senior MemberCaptains Club Member
 
Join Date: Mar 2004
Location: Edgewater, NJ
Posts: 4,706
Default RE: LMF-200 won't talk to C70

Did you get this fixed? Did you try the NMEA instead of the seatalk? I would think that the NMEA is the way to go.
DarthBaiter is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread