Notices

582 L Problem

Old 04-24-2007, 09:58 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Jul 2003
Posts: 804
Default 582 L Problem

I installed a Furuno 582 L on my boat recently. I notice that when I power up the motors , there is alot of interfearence on the screen and it becomes very unreadable. How do I fix this problem ? Im sure it has something to do with the motors but I was wondering if I can wire it differently so that doesnt happen.

Thanks
whos your daddy is offline  
Old 04-30-2007, 04:45 PM
  #2  
Senior MemberCaptains Club MemberPLEDGER
 
Join Date: Jun 2003
Location: Smithtown, Long Island
Posts: 744
Default Re: 582 L Problem

You can try isolating the transducer wire from boats electrical wiring. I just tested an M260 with a Furuno BBF1 and had a similar problem, I ended up buying a 10 foot piece of PVC tubing and running the transducer wire through it well away from the rest of the wires and problem was solved. Good Luck.
sand box is offline  
Old 04-30-2007, 05:21 PM
  #3  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Jul 2003
Posts: 804
Default RE: 582 L Problem

Thanks , I will try that and get back with you.
whos your daddy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread