Changing a Furuno AIS from RX only to RX/TX??
#1
Senior Member

Thread Starter
Join Date: Jan 2005
Location: GA
Posts: 1,786

I have a Furuno FA-150 AIS, and it says it is in RX Mode only in the main menu. I have checked the settings and our MMSI # is inputted correctly, and the VHF Channel setting seem to be correct too, but I cant find anywhere in the Operators Manual or scrolling through the Menu on the unit, about how to change from RX only to RX & TX mode.
Anybody familiar with this unit?
Anybody familiar with this unit?
#2
Junior Member

Join Date: Apr 2006
Location:
Posts: 9

read page 38-40 of this PDF. it should also be the same pages in your owner's manual.
http://www.furuno.com/Furuno/Doc/0/K...04.14.2005.pdf
http://www.furuno.com/Furuno/Doc/0/K...04.14.2005.pdf
#5
Senior Member
Join Date: Jan 2007
Location: See screen name
Posts: 5,155

Same way the OP did, look at the document and/or contact Furuno, who has excellent customer tech support.
360-834-9300
http://www.furunousa.com/Support/Default.aspx
360-834-9300
http://www.furunousa.com/Support/Default.aspx