Raymarine install with BEP 717-100

Old 04-18-2007, 03:47 PM
Junior Member
Thread Starter
Join Date: Dec 2006
Location: Lagrange Ga.
Posts: 3
Default Raymarine install with BEP 717-100

I have always had a FF that was just enough to do the job (low end unit). Looking at the forum over the last 6 months I selected the C80 Raymarine system. I have only the GPS and FF. I will be purchasing the Radar in the fall. I installed the unit over the winter along with the BEP 717-100 battery cluster with VSR’s for twin engines. I installed a house battery and rewired ( all electronics to a new Blue Sea fuse block (ancor wire with tin plated heat shrink connectors). I put the boat on the water for the first time yesterday and I have to say that I am very impressed and happy with the system. Easy to see screen (with protective cover), bottom structure clarity, no voltage spikes restarting the unit and the list go on!! My selection on Raymarine was a personal choice and know that there are many other comparable or even better manufactures for marine electronics out there.
My thanks to all of you on the forum. You have helped me not only on this install but on many other occasions.
Thanks again,
robalohd is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread