Notices
Marine Electronics Forum

TM x-ducer, Scout 222 Sportfish. HELP !

Old 03-25-2007, 01:21 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Jan 2007
Location: NC
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Default TM x-ducer, Scout 222 Sportfish. HELP !

Having trouble mounting T/M transducer on '06 Scout 22' CC with trim tabs. Not much room considering trim tabs, livewell pickup, & engine bracket. Need to stay atleast 8" from centerline where there is a livewell pickup located just forward of this area. Then I have to have a minimum of 5" of clearence between bottom of hull & bottom of engine bracket to allow for ducer to swivel up & down, which still limits me to the area of the livewell pickup. The only other area is between the engine bracket & trim tab, which if mounted here, will be directly beside the engine bracket & approx. 1-2" from my trim tab. I might can get just to the side of the livewell pickup, where it wouldn't be in the direct path of it, but within an inch or 2 outside of it? Can someone tell me if either of these 2 areas might work, or any suggestions? The port side is clear, but I've heard it's better on the starboard side? Need help making decisions. I'm mounting an airmar P66.
Old 03-25-2007, 09:32 AM
  #2  
Admirals ClubCaptains Club Member Admiral's Club Member
 
Join Date: Sep 2005
Location: jacksonville, florida
Posts: 325
Likes: 0
Received 28 Likes on 20 Posts
Default Re: TM x-ducer, Scout 222 Sportfish. HELP !

The portside works fine on my scout boat, I read bottom at 40mph with a Ray marine unit. I think its the same ducer.
Old 03-25-2007, 11:57 AM
  #3  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Jan 2007
Location: NC
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TM x-ducer, Scout 222 Sportfish. HELP !

What type of fishfinder are you using? Did you run into the same problem as me? I have the Furuno fcv-620. Thanks for the help!
Old 03-25-2007, 06:23 PM
  #4  
Admirals ClubCaptains Club Member Admiral's Club Member
 
Join Date: Sep 2005
Location: jacksonville, florida
Posts: 325
Likes: 0
Received 28 Likes on 20 Posts
Default Re: TM x-ducer, Scout 222 Sportfish. HELP !

I have the RM unit DS600 w/ tabs. Little different layout but otherwise the port worked fine.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.