Notices
Marine Electronics Forum
Like Tree1Likes
  • 1 Post By coastboater

Yanmar i8325P ECU question

Old 09-12-2019, 02:51 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Sep 2019
Posts: 2
Question Yanmar i8325P ECU question

Hello and thanks in advance for some help maybe.
My dad is selling his mainship 2011 with flybridge also
Today the new people who want to buy it meet us with a broker and the inspector
The boat is very nice clean well maintained,we go out on the test drive we start medium speed then full speed for about 1 min then the boat loses like a second off speed then goes into neutral speed buy it self. Had to get towed back lucky we where not to far
when this happened the digital Yanmar box displayed no more readings like temp, speed etc
when I do the diagnostics it s says can t communicate with I2 module (i8325P) ECU and can't give me engine serial number or nothing
I checked the ECU and getting power from the harnest going to the ECU, i opened the ECU I2 module to see if there was a fuse and no fuse inside the box
At this point I think the ECU is dead and needs replacing. Im not a total expert but I have lots of common sense and know enough of electronics and mechanics
ho, and I have a red light beside the key to start the engine that starts flashing then goes solid

Any help would be appreciate
Thanks

PS: I see online that we don't see much of this ECU i8325P
sorroy is offline  
Old 09-13-2019, 05:20 PM
  #2  
Junior Member
Thread Starter
 
Join Date: Sep 2019
Posts: 2
Question Bump

Bump
sorroy is offline  
Old 09-14-2019, 11:09 AM
  #3  
Senior MemberCaptains Club Member
 
Join Date: Jan 2003
Location: Charleston, SC
Posts: 3,029
Default

You're likely to get more responses asking your question here: https://boatdiesel.com/

Its a pay site, but worth the cost of admission.
good luck
sorroy likes this.
coastboater is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread