Notices
Marine Electronics Forum

Dytek

Old 10-17-2006, 05:56 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Apr 2004
Location: Raleigh, NC & Hampstead, NC
Posts: 3,193
Received 242 Likes on 154 Posts
Default Dytek

Any one know where I can purchase a Dytek head unit?
Old 10-17-2006, 06:50 PM
  #2  
Senior Member
 
Join Date: Aug 2002
Location: West Palm Beach,FL,USA
Posts: 1,318
Received 42 Likes on 26 Posts
Default RE: Dytek

I believe they were aquired by Charles Indistries a number of years ago. Not sure they have any parts, but check them out.
http://www.charlesindustries.com/
Old 10-17-2006, 07:09 PM
  #3  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Apr 2004
Location: Raleigh, NC & Hampstead, NC
Posts: 3,193
Received 242 Likes on 154 Posts
Default Re: Dytek

Thanks for the reply. I am aware they were purchased several years ago and was told they discontinued the product, but some one may have one for sale or left over.
Old 10-19-2006, 10:43 AM
  #4  
Senior MemberCaptains Club Member
 
Join Date: Aug 2004
Location: New York, NY
Posts: 761
Likes: 0
Received 4 Likes on 1 Post
Default Re: Dytek

Are you talking about a temperature gauge or something else? I always knew that Dytek make a great temp gauge but would be curious to know what other products they put out.

Old 10-19-2006, 10:54 AM
  #5  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Apr 2004
Location: Raleigh, NC & Hampstead, NC
Posts: 3,193
Received 242 Likes on 154 Posts
Default Re: Dytek

I am referring to the temp gauge, and that is what I am looking for. They now make other marine products, but not the temp gauge any more.
Old 10-19-2006, 07:38 PM
  #6  
Senior MemberCaptains Club MemberPLEDGER
 
Join Date: Sep 2003
Location: Pocasset, MA
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Dytek

I have been searching the same. I would like a st1000 but have not had any luck finding one. Any other choice that can be calibrated and are as accurate? Rob
Old 11-17-2010, 03:53 PM
  #7  
Junior Member
 
Join Date: May 2010
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

The CruzPro WTP110 digital sea temp gauge is very accurate, can be calibrated using the front panel keys and has a resolution of 0.01 degrees. Updates once every two seconds.

See www.cruzpro.com/wtp110ag.pdf for the user manual/specifications. Works with either the 30Kohm Dytek temperature sender or a standard 10K ohm temperature sender.

Regards,

Bert van den Berg
CruzPro Ltd.
www.cruzpro.com
Old 11-18-2010, 07:41 AM
  #8  
Senior Member
 
Join Date: Jun 2006
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
Default

Si-Tex will have a new unit the SST-110 availble soon.
It will work with the Dytek ducer.
Old 11-20-2010, 06:57 PM
  #9  
Senior Member
 
Join Date: Dec 2003
Location: San Diego/ Puerto Vallarta
Posts: 198
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by bvdb View Post
The CruzPro WTP110 digital sea temp gauge is very accurate, can be calibrated using the front panel keys and has a resolution of 0.01 degrees. Updates once every two seconds.

See www.cruzpro.com/wtp110ag.pdf for the user manual/specifications. Works with either the 30Kohm Dytek temperature sender or a standard 10K ohm temperature sender.

Regards,

Bert van den Berg
CruzPro Ltd.
www.cruzpro.com
I love my Cruzpro surface temp gauge. I replaced three old st1000,s and hope this one lasts. Hooked it right up to my Nobeltec software without any issues!!

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.