Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > Marine Electronics Forum
Reload this Page >

Fuel/Tach/Volt Guage In-Op on 2006 Angler 173 Bay Boat

Notices

Fuel/Tach/Volt Guage In-Op on 2006 Angler 173 Bay Boat

Old 06-14-2019, 10:29 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jun 2019
Posts: 1
Default Fuel/Tach/Volt Guage In-Op on 2006 Angler 173 Bay Boat

The guages do not work at all. I also wasn't able to obtain an on-line Angler operators manual. I'm not sure if the entire unit is faulty or it is another problem.I looked very closely at the unit when I turn the volt meter works, but the gas guage just moves slightly, but doesnt show how much fuel I have. The tach doesnt move at all. Any advise on how to troubleshoot this problem would be greatly, greatly appreciated.
I

Last edited by Seahunt007; 06-14-2019 at 10:32 AM. Reason: Add photos
Seahunt007 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread