Drift bags , Drift socks 5 sizes 60" to 14'
#1
Admirals Club





Thread Starter
Join Date: Feb 2003
Location: (snowbird in training) Lake Erie Un-salted water and shark free!
Posts: 7,825
Received 839 Likes
on
466 Posts

For drift and boat control when wind conditions are such that your drift speed is too fast. Also used for bow control while on a drift.. If you're fishing in a current, these will not help you... They will drift right along with you-in the current. Your drift must be wind generated for this style of device to work. Not a safety device.
Made in the USA.
Specs:
420D coated nylon.
2" Nylon webbing
Closed cell Polyurethane float built in
Lead weight sewn in to assist while deploying
Storage sleeve
The 120" and 14' bag webbing ends are loose with grommets. To use them your drift bags line is simply passed through each web end in sequence then tied off. This is done to reduce the possibility of tangling when handling the bag for deployment and storage. If they are assembled like the smaller bags they WILL loop, twist and be a mess.. Trust me on this..

Measurements:
Measurement is the distance along the bag opening with the bag laying on a flat surface. This is typical for this type of appliance. Sizing is based on general use. To maximize drag step up one size..
We normally stock the 84", 120" and 14' bags. The smaller ones are on request and take less than a week to make and ship (usually)
Shipping rate may vary depending on zip code. If you are in Florida sales tax will apply.
84" bag opens to about 4.5' diameter. $129 + $17 shipping
For boats +/-25' range
120" bag opens to just over 6' diameter. $189 + $20 shipping
For boats +/- 29' range
14' bag opens to just under 9' diameter. $299 + $22 shipping
For boats +/- 32' range
60" bag

120" bag

14' bag

I've got at least three of each size available. Shipping is flat rate anywhere in the U.S.
PM with questions.
Made in the USA.
Specs:
420D coated nylon.
2" Nylon webbing
Closed cell Polyurethane float built in
Lead weight sewn in to assist while deploying
Storage sleeve
The 120" and 14' bag webbing ends are loose with grommets. To use them your drift bags line is simply passed through each web end in sequence then tied off. This is done to reduce the possibility of tangling when handling the bag for deployment and storage. If they are assembled like the smaller bags they WILL loop, twist and be a mess.. Trust me on this..
Measurements:
Measurement is the distance along the bag opening with the bag laying on a flat surface. This is typical for this type of appliance. Sizing is based on general use. To maximize drag step up one size..
We normally stock the 84", 120" and 14' bags. The smaller ones are on request and take less than a week to make and ship (usually)
Shipping rate may vary depending on zip code. If you are in Florida sales tax will apply.
84" bag opens to about 4.5' diameter. $129 + $17 shipping
For boats +/-25' range
120" bag opens to just over 6' diameter. $189 + $20 shipping
For boats +/- 29' range
14' bag opens to just under 9' diameter. $299 + $22 shipping
For boats +/- 32' range
60" bag
120" bag
14' bag
I've got at least three of each size available. Shipping is flat rate anywhere in the U.S.
PM with questions.
Last edited by Classic25; 07-12-2017 at 06:06 AM. Reason: Updated shipping prices
#2
Senior Member
Join Date: May 2010
Location: Pensacola, FL
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts

I bought the 120" bag a while back and all I have to say its amazing quality...I highly recommend. Perfect for the guys wanting to get into Kite fishing in a couple of months and don't want to drop a grand on a paratech
Last edited by flvol77; 08-18-2012 at 08:42 PM.
#5
Senior Member
Join Date: Jul 2011
Location: Chadds Ford, PA / Sea Isle City, NJ
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts

What size do you recommend for a boat that is 27'4" LOA w/o the engines? Can't decide between the 84" and the 120".
Shoot me a PM with your recommendation and I will pay you via paypal immediately.
Thanks!
Shoot me a PM with your recommendation and I will pay you via paypal immediately.
Thanks!
#8
Senior Member

#10
Senior Member

Classic25...Do you make one that would work for a 42 boat in the 20,000 lb range.
My pm box is not working ...please give me a call at 843.304.4834 or shoot me an email at jjdubose@aol.com.
Thanks
My pm box is not working ...please give me a call at 843.304.4834 or shoot me an email at jjdubose@aol.com.
Thanks
#15
Admirals Club





Thread Starter
Join Date: Feb 2003
Location: (snowbird in training) Lake Erie Un-salted water and shark free!
Posts: 7,825
Received 839 Likes
on
466 Posts

The product kawliga is using are "Trolling bags" not drift bags. They are used in lieu of a trolling valve(s) for very slow speed bait presentations.
Also 100% made in the USA.
Again, thanks Mike!