Drift bags , Drift socks 5 sizes 60" to 14'
 

For drift and boat control when wind conditions are such that your drift speed is too fast. Also used for bow control while on a drift.. If you're fishing in a current, these will not help you... They will drift right along with you-in the current. Your drift must be wind generated for this style of device to work. Not a safety device.

Made in the USA.

Specs:
420D coated nylon.
2" Nylon webbing
Closed cell Polyurethane float built in
Lead weight sewn in to assist while deploying
Storage sleeve

The 120" and 14' bag webbing ends are loose with grommets. To use them your drift bags line is simply passed through each web end in sequence then tied off. This is done to reduce the possibility of tangling when handling the bag for deployment and storage. If they are assembled like the smaller bags they WILL loop, twist and be a mess.. Trust me on this..




https://lh5.googleusercontent.com/-v...0/IMG_1187.JPG

Measurements:
Measurement is the distance along the bag opening with the bag laying on a flat surface. This is typical for this type of appliance. Sizing is based on general use. To maximize drag step up one size..

We normally stock the 84", 120" and 14' bags. The smaller ones are on request and take less than a week to make and ship (usually)

Shipping rate may vary depending on zip code. If you are in Florida sales tax will apply.


84" bag opens to about 4.5' diameter. $129 + $17 shipping
For boats +/-25' range

120" bag opens to just over 6' diameter. $189 + $20 shipping
For boats +/- 29' range

14' bag opens to just under 9' diameter. $299 + $22 shipping
For boats +/- 32' range

60" bag
https://lh4.googleusercontent.com/-Z...6/IMG_1188.JPG

120" bag
https://lh6.googleusercontent.com/-3...0/IMG_2102.JPG

14' bag

https://lh4.googleusercontent.com/-m...8/s800/003.JPG


I've got at least three of each size available. Shipping is flat rate anywhere in the U.S.

PM with questions.

I bought the 120" bag a while back and all I have to say its amazing quality...I highly recommend. Perfect for the guys wanting to get into Kite fishing in a couple of months and don't want to drop a grand on a paratech

Shit I just bought one! This one looks much better.

:thumbsup:
Thanks guys..
Forgot to add I take Pay pal and CC..

:tht_rulez:

What size do you recommend for a boat that is 27'4" LOA w/o the engines? Can't decide between the 84" and the 120".

Shoot me a PM with your recommendation and I will pay you via paypal immediately.

Thanks!

westernhunter, PM sent.
Thanks!
Bob

More available..

Kite season is coming!!

sent you a PM, then saw your post. when you get them again I will take one.

PM's replied to. Thanks.

Classic25...Do you make one that would work for a 42 boat in the 20,000 lb range.

My pm box is not working ...please give me a call at 843.304.4834 or shoot me an email at jjdubose@aol.com.

Thanks

Bump...Anyone have a contact number or email for Classic25?

Nice talking with you Nauti Hooker!

PM sent.

Bob makes a great product, I have 2 for my 31 Tiara for salmon trolling....quality construction at a good price.

Mike

Thanks Mike,
The product kawliga is using are "Trolling bags" not drift bags. They are used in lieu of a trolling valve(s) for very slow speed bait presentations.

https://lh3.googleusercontent.com/-C...0/IMG_0881.JPG

Also 100% made in the USA.

Again, thanks Mike!

BTT,
Shipping went up a bit. New price in top of this thread.

I'll take a 120" please

PayPal Okay?

I want a 120", send me PM with ordering info.

PM's sent..
Thank you gentlemen!

I did not get a PM regarding payment information.